Linus Gabriel Sebastian & Linus Media Group / Linus Tech Tips - Narcissistic corporate shill YouTuber driving his media empire into the ground. KILL COUNT: 2

[skol]

The shape comes from the unique blend of a dilator and a bit holder.
It was pitched by Anthony as the “8 (inch) bit ”

 

[Sunflower Samurai]

People only liked anthony because his voice was less grating than half the soy goblins who go on LTT and his linux showcases were passable

On the Console sperging front, PS3 doesnt deserve S tier, the 360 does, and i say that as a nigga that had a ps3, Dreamcast and Wii deserve S tier more, Switch is an A at best

 

[FuckedOffToff]

The state of western civilization.

View attachment 5899690

I have no idea what I'm looking at, but I do know that there's not one soul in that picture.

 

[John Ligma]

I have no idea what I'm looking at, but I do know that there's not one soul in that picture.

Severely autistic pooner Jew on the right (they were trying to say it's a man but I think it's pretty obviously a chick on test) and a severely autistic lesbian on the left. Linus sure hires the cream of the crop.

 

[blablabla]

the ps3 fucking sucked at launch at for most of its life. now a hen enabled ps3 is on another ballpark

 

[Migraine Box]

This is apparently a new bits holder that is still in development. Why would I want to have a dildo shaped thing that hold so little bits? Retard design.
View attachment 5917850

linus my exceptional nigga, explain to me how the anal bit plug is any better than this $7 kit that comes in nice stackable hard case and has so many fucking bits, half of which I'll probably never use

 

[indomitable snowman]

linus my exceptional nigga, explain to me how the anal bit plug is any better than this $7 kit that comes in nice stackable hard case and has so many fucking bits, half of which I'll probably never use
View attachment 5919391

"Trust me bro" warranty and it comes in faggy orange.

 

[bremer]

This is apparently a new bits holder that is still in development. Why would I want to have a dildo shaped thing that hold so little bits? Retard design.
View attachment 5917850

What is it with this dumb obsession of fitting the bits into the screwdriver itself? Not only is it over-engineered and another unneeded failure point (yes, on a screwdriver...), what does it even achieve? Do they seriously want to imply most standard screwdriver kits with the bits separate do not already fit into your pocket or toolbox?

 

[A Cat in a Minefield]

What is it with this dumb obsession of fitting the bits into the screwdriver itself? Not only is it over-engineered and another unneeded failure point (yes, on a screwdriver...), what does it even achieve? Do they seriously want to imply most standard screwdriver kits with the bits separate do not already fit into your pocket or toolbox?

I don't get it either. I guesse it's practical in the sense that you only have to take one thing with you, and have everything you need, but then again you could just put the screwdriver and the bits separately into a small bag. If I had to use bits like that, I personally would be annoyed of I'd have to fiddle with the top, just to get a new bit.

But the dildo takes the cake, imo. They looked at the holder they designed (assuming they did it) and just went durrrrr, let us reuse this design, even though it makes zero sense in the new concept. It's not only retarded, but shows how lazy they are.

 

[U+200B]

Oh boy I can't wait to put my LTTFixIt Kit ( $249.99 ) in my LTT Backpack ( $249.99 ) while drinking from my LTT Water Bottle ( $29.99 ) that has a two frozen LTT Stubby Screwdrivers ( $119.98 ) in it instead of ice, while using a LTT Screwdrive ( $69.99 ) as a buttplug as I defend Anthony (Emily(male)) in the comment section.

Normally I would say this is a waste of money, but you absolutely know that all the LTT fans will buy into it, while calling it the best bits set since screwdrivers with swapable bits were invented.

What is it with this dumb obsession of fitting the bits into the screwdriver itself? Not only is it over-engineered and another unneeded failure point (yes, on a screwdriver...), what does it even achieve? Do they seriously want to imply most standard screwdriver kits with the bits separate do not already fit into your pocket or toolbox?

I really don't mind it and I can come in handy from time to time, especially when you only put your most used bits in there. I do prefere though how PB Swiss does it on some of their newer models where it comes out of the side rather than pop out of the back (like the LTT one) with small thin plastic holding them in.

 

[Nabeshin]

Do anyone knows the bilibili ltt channel? I'm curious to look if they put such faggotry on china

 

[1999 prick]

Do anyone knows the bilibili ltt channel? I'm curious to look if they put such faggotry on china

I ain't got a clue if it's the same or a copy but here.
Speaking of which, why hasn't Null post his faggotry on Bilibili?

Edit:
I found a YT Short showing off his Bilibili golden play button and it is indeed the same one.
Source

 

[Kuritan Deplorable]

What is it with this dumb obsession of fitting the bits into the screwdriver itself? Not only is it over-engineered and another unneeded failure point (yes, on a screwdriver...), what does it even achieve? Do they seriously want to imply most standard screwdriver kits with the bits separate do not already fit into your pocket or toolbox?

When you have something your throwing into a dedicated space and limited use case like a car, being able to fire and forget and just leave it there with the common bits it might need is nice. Your not using it frequently enough to be particularly worried about the additional failure points, and it staying all together is perfect since that things gonna be tossed outta the way constantly for years because you don't usually need it. Can't lose half of it when its all together.

But the use case falls apart entirely when its a primary driver, a tool to cover all your needs that you deliberately grab for a specific use case. I have never needed to suddenly unscrew a computer three hundred miles from home right this absolute second - I can walk over to my little tool stack in the cabinet and take out my driver with its array of bits. The MerchFucker9000 is probably the worst ergonomic situation for its use case, worst accessibility, worst storability (That fuckers gonna roll away) and excessive complexity for what it is. The only explanation for its existence is someone got high, opened fusion 360, and did a cut and mirror on the handle design and thought they were gods gift to the world.

 

[hog cranking frog]

You absolutely will not find a single multi tool driver like that on any pros work bench for PC work. Anyone doing this stuff professionally has a tool chest filled with single function harbor freight tools costing less than that backpack.

That said it's 2024, there are no pros at work benches building systems any more. Hasn't been for 15-20 years if we're being honest.

The market then, PC building LARPers. Wild times we live in.

 

[Kuritan Deplorable]

The market then, PC building LARPers. Wild times we live in.

Which I have to say is the absolute weirdest submarket that I can think of. Having a primary hobby being PC building is just difficult for me to mentally process - Having it as a side element to a computer centric hobby like 3d printing, gaming, streaming, makes total sense. But PC building as a standalone hobby is like being a butcher as a hobby, but not cooking. There's no prestige, no result, no real purpose or goal or achievement to be had down that narrow strip.

And yet, despite being completely nonsensical and unsubstantiated, people are LARPing it. How incredibly lame do you have to be to think your life looks better to others if you pretend to be a peak consumer with no real purpose, product or personal development coming out of it.

 

[hog cranking frog]

There was a brief time during the Gigahertz wars when tossing a car radiator out your window in January, machining your own water blocks and tricking out what were essentially office styled beige boxes when PC building was at least interesting. We are far from those times.

 

[CYKA RUSH B]

There was a brief time during the Gigahertz wars when tossing a car radiator out your window in January, machining your own water blocks and tricking out what were essentially office styled beige boxes when PC building was at least interesting. We are far from those times.

I remember those times. Outdoor electrical junction box reservoirs, chevette heater core radiator, aquarium pumps and a copper block cut up with a hacksaw, worked on a drill press and soldered shut.

Warm memories. So far removed to the current year gaymer rgbnigger faggotry. what a shame.

 

[Mr.Bucket]

I've tried using bulky multi-bit screwdrivers to work on my PC and they just get in the damn way. Purpose made, svelte, normal drivers are the way to go.

 

[Slav Power]

We don't have a Gamers Nexus deepthroating thread but we do have a shitting on LTT thread so I guess it fits:

GN did actual investigative journalism into EKWB and it's not looking good for the company.

Steve, as always, has the cojones to expose himself for legal battles, let alone loss of sponsors, to do something that we used to call journalism.
Imagine if Linus makes a video deepthroating EKWB after this exposé because the shekels will be more important than saving the little face that he still has, it would be hilarious.

 

[mandatorylurk]

The first hour of the WAN Show is with a guy from the original 90’s tech era who cowrote the X86 code and worked for AMD and Nvidia, it’s very interesting hearing and seeing Linus get put in his place and he accepts it. It’s not a hostile or malicious interview but it shows the power level between a Luffy and an Usopp/weeb autism.

Also later in the show it is said the Spiffing Brit tea computer they made two years ago a) didn’t survive transit all those months ago, b) was hardly if ever used, and c) running tea made it grow stuff in the loop. These fags do a lot of stupid things but I always hated the custom PCs for people to clout chase who never asked for them, because it was a waste of resources, particularly at the time when supply was very scarce.