Mega Rad Gun Thread

[Seething Bazelgeuse]

Where's a good place to get number 10 percussion caps?
I'm getting a black powder revolver and it comes with everything but the caps.

Some fella recommended a reloader to make the caps out of scrap cans, but I don't really want to use scrap metal for it, nor do I really have the space for it.

I buy all my black powder shit online. I recently bought number 10s off Cabela's though keep in mind those fucks will charge you another $25 for a hazardous materials charge.

 

[POWER IN MISERY]

I'm going to get everything retard, this extended discussion is about the plate issue I'm very hung up over

what are you gonna do, get a bullet proof diaper as well? this extended discussion about .50 cals and five man juggernaut tranny counter strike stacks sounds like a stephen segal movie. from what i half read you're getting ahead of yourself. while you're at it i'll shill the cmmg .22 kit.

@TETRABAX if you haven't already shared what is your most niggerish gun?

 

[EggImpregnator]

whats the over/under that jersh is gonna go buy an AR-10 and instantly regret it the moment he starts doing drills with it

I don't think he's gonna actually do drills or get tactical training with it

 

[Burekbossman]

I'm going to get everything retard, this extended discussion is about the plate issue I'm very hung up over

Get a .308 semiauto, go hunting with it to get used to firing under stress. You will realize that body armor on a faggot will not stop you.

 

[Rent Tin]

It is absolutely possible to suffer broken bones while wearing steel plates. You're delusional if you think otherwise...

We've been talking the last 50,000 about level IV armor. Can you point out to me where steel plates (which don't reach level IV) ever came up in the conversation? I don't care about steel armor, nobody who anybody should take seriously recommends steel armor unless it was literally that or nothing. The ex-military troons Josh is worried about are retarded, but they have prior experience and are extremely unlikely to buy steel when ceramic is just as affordable.

Sure, if you smack a ceramic plate in the same exact spot in combat two or three fucking times you might HURT somebody, but not stop them from being an immediate threat. People shilling the Zoomer version of the "Stoppin' powah" meme (Ah yes, this here 7.62 NATO will break their ribs straight through that armor!) for the last twenty thousand pages of the thread has got me MATI.

this extended discussion is about the plate issue I'm very hung up over

Stop being hung up on it. There are a lot of smart people here who have given you the answer: There isn't a solution.
No amount of "stoppin' powah" is going to penetrate the armor of somebody who hates your guts enough to come and try to kill you. Incorporate DIY gender surgery into your drills. Aim for the groin and assist them with their dilation if need be.

If any of you retards start with the .50BMG meme again I'm going to have a stroke.

 

[Baked Al-Aqsa]

Lmao, nigga tryna get kewl meme guns he saw in guntoob slop cuz he thinks he's John Wick, meanwhile he's 300lbs of hollandaise and franks sauce and will never actually do any training other than mag dumping into trash behind his double-wide like a wigger. He will get killed by the first guy who doesn't pant from walking to the mailbox.

Guys, I no longer believe "le 2-Eh iz 4 erryboddy" by default anymore. People need to either have grown up along gun culture to understand basic shit, or bullied mercilessly online and in person till they lurk long enough and make some mistakes to absorb information and get over their dunning-kruger to "get it".

 

[EggImpregnator]

I'm going to get everything retard, this extended discussion is about the plate issue I'm very hung up over

There's no practical way to get through a level 4 plate with a single man operated weapon.

Here's the thing, even getting hit in a plate with a 556 will feel like a sledgehammer hitting your chest. It's not like the trannies are gonna be kitted up in call of duty juggernaut uniforms that make them impervious to bullets.

There are men who get paid hundreds of thousands of dollars a year, companies than make tens of millions of dollars a year, and billion dollar nation militaries - all of which use firearms in a very serious and proffesional manner. All of them have come to the same answer for fighting against opponents with rifle rated plates.

Edit: thought I'd add this, once those veins are ruptured, you can't stop the bleeding. You can't put tourniquets on your waist or hips.

Carry a FUCK TON of ammo and shoot for the head or pelvic bowl. The head is self explanatory. But if you hit someone in the pelvic bowl, they will drop instantly, and will most likely die (if you use ammunition that fragments, like 55gr 556 out of an AR15.) The pelvic bowl is made up of 3 main bones and a number of minor ones. In the center there is the sacrum. This bone is at the bottom of the spine and if it shatters from a gunshot the victim will instantly lose the use of the legs and could potentially be paralyzed for the rest of their life. There's two bones on either side of the Sacrum, the left and right ilium. Whichever one is hit, that side's leg will be instantly rendered useless. Here's where the lethal part comes in. You essentially have 6 six! major blood vessels and arteries in the pelvic bowl. Any one of these getting perforated will cause a very quick death unless the person is already in a hospital on the operating table. You have the Abdominal Aorta(red), a giant huge fucking artery that comes directly from your heart, which splits into the left and right Iliac arteries. Then you have the Inferior Vena Cava(blue), a huge vein that puts blood directly into your heart, and the left and right ilium veins which feed it.

An AR10 is actually worse than an AR15 for defeating someone with body armor. Because to defeat someone in body armor, you need a lot of ammunition, and you need something with low recoil so you can shoot round after round and stay on target.

 

[Lichen Bark]

I'm going to get everything retard, this extended discussion is about the plate issue I'm very hung up over

Have you thought about a gun to knock drones down? A 12 gauge shotgun with a longer barrel? full choke? What shell loads? 3 inch #4?

Anyone have ideas? I'm curious about this one, because of what we've seen in Ukraine.

 

[TETRABAX]

@TETRABAX if you haven't already shared what is your most niggerish gun?

 

[Rent Tin]

Here's the thing, even getting hit in a plate with a 556 will feel like a sledgehammer hitting your chest. It's not like the trannies are gonna be kitted up in call of duty juggernaut uniforms that make them impervious to bullets.

Here's a grandpa taking a 7.62x51/.308 to a shitty vest designed in the 80's. Nothing, he isn't thrown across the room. A sledgehammer did not break his fragile grandpa ribs. Hell, he's literally standing cross-feet and doesn't so much as wiggle when he's shot. That's a fuck load more foot pounds of force than a 5.56, too.

https://youtu.be/o5f1Fo4r4_I?si=AgzDcg9tqtGxqS3n&t=144

I've talked to buddies who came back from overseas and hardly even knew they took a hit to their plate until they were out of combat. The resurgence of the stopping powah myth ITT is from people conflating near penetrations from AP sniper rounds with standard hits from rifle rounds. People are also confusing things with the admittedly serious issue of blunt trauma from soft armor.

 

[POWER IN MISERY]

View attachment 6142655

i should have known. god bless. i distinctly remember breaking into laughter when i held the C9 a friend owned. do you like it?

 

[TETRABAX]

i should have known. god bless. i distinctly remember breaking into laughter when i held the C9 a friend owned. do you like it?

It's probably the only hi-point safe queen in existence. Never shot it

 

[Rent Tin]

Have you thought about a gun to knock drones down? A 12 gauge shotgun with a longer barrel? full choke? What shell loads? 3 inch #4?

Do not shoot drones down, it is a federal crime. Knowing people that go after Null, they will likely fly drones over his house to bait him into committing an actual crime with video evidence. I haven't heard of prosecutions for this before, but I don't doubt that various three letter agencies would not mind putting pressure onto his local prosecutor to have him charged.

 

[Baked Al-Aqsa]

Have you thought about a gun to knock drones down? A 12 gauge shotgun with a longer barrel? full choke? What shell loads? 3 inch #4?

Anyone have ideas? I'm curious about this one, because of what we've seen in Ukraine.

>20-30 yards
That's pretty much the maximum effectiveness for a no 5 load of birdshot without a choke. You probably get another 10-20yds with a choke. That being said, that's well within range of a drone's fov. There's a very good reason you want to try at all costs not to do that. It seems effective in the short term, so idk.

 

[EggImpregnator]

Here's a grandpa taking a 7.62x51/.308 to a shitty vest designed in the 80's. Nothing, he isn't thrown across the room. A sledgehammer did not break his fragile grandpa ribs. Hell, he's literally standing cross-feet and doesn't so much as wiggle when he's shot. That's a fuck load more foot pounds of force than a 5.56, too.

https://youtu.be/o5f1Fo4r4_I?si=AgzDcg9tqtGxqS3n&t=144

I've talked to buddies who came back from overseas and hardly even knew they took a hit to their plate until they were out of combat. The resurgence of the stopping powah myth ITT is from people conflating near penetrations from AP sniper rounds with standard hits from rifle rounds. People are also confusing things with the admittedly serious issue of blunt trauma from soft armor.

That shot still hurt him, and he was in a controlled environment where he could anticipate and mentally prepare for the hit. And some sand nigger hitting a dude at 500 yards when he's wearing a SAPI with a soft armor backing isn't going to effect a physically fit and adrenaline filled soldier. An estrogen filled and terrified tranny however will have a panic attack and asthma attack if their plate catches a 556.

 

[LemonParty]

Assembling for AR-10 is a huge pain in the ass. Iirc it's not as standardized as the AR-15 platform. I'd just buy a stock one and go from there tbh unless you have something very specific in mind

Assembling yes, like from scratch. It's a little more difficult building the trigger assembly but 80% lowers are a popular thing for both AR-10s and AR-15s. If @Null can build the infrastructure to support the most LGBTP webside in history he can figure out how to build a plug & play gun.

 

[TETRABAX]

Assembling yes, like from scratch. It's a little more difficult ehen your're building the triger assembly but 80% lowers are a popular thing for both AR-10s and AR-15s. If @Null can build the infrastructure to support the most LGBTP webside in history he can figure out how to build a plug & play gun.

Iirc there were 2 different standards for the AR-10 platform and they weren't interchangable

Edit:
Search AI says there is 4 different standards but the 2 I remember are ArmaLite and DPMS

 

[EggImpregnator]

Where are my fellow glockheads at?

 

[Seething Bazelgeuse]

We've been talking the last 50,000 about level IV armor. Can you point out to me where steel plates (which don't reach level IV) ever came up in the conversation? I don't care about steel armor, nobody who anybody should take seriously recommends steel armor unless it was literally that or nothing. The ex-military troons Josh is worried about are retarded, but they have prior experience and are extremely unlikely to buy steel when ceramic is just as affordable.

Sure, if you smack a ceramic plate in the same exact spot in combat two or three fucking times you might HURT somebody, but not stop them from being an immediate threat. People shilling the Zoomer version of the "Stoppin' powah" meme (Ah yes, this here 7.62 NATO will break their ribs straight through that armor!) for the last twenty thousand pages of the thread has got me MATI.


Stop being hung up on it. There are a lot of smart people here who have given you the answer: There isn't a solution.
No amount of "stoppin' powah" is going to penetrate the armor of somebody who hates your guts enough to come and try to kill you. Incorporate DIY gender surgery into your drills. Aim for the groin and assist them with their dilation if need be.

If any of you retards start with the .50BMG meme again I'm going to have a stroke.

Yea I've been up for like over 20 hours, you're correct with ceramic level iv shit. I've been thinking of and talking about steel shit and lower NIJ levels since that's what I purchased years ago before I knew any better and has been more common for longer.

 

[Rent Tin]

Yea I've been up for like over 20 hours, you're correct with ceramic level iv shit. I've been thinking of and talking about steel shit and lower NIJ levels since that's what I purchased years ago before I knew any better and has been more common for longer.

You're not wrong and it was a fair assumption, because cheap backyard steel is the favorite of tactical troons in general. Glad that you got the memo, going hiking in plates really solidified the importance of using lighter materials where possible.