- Joined
- Nov 10, 2019
Really informative even if a bit long. Those are nice guns but that price point *eyepop*
General GunTuber thread
- Thread starter Trig.Point
- Start date
-
🐕 I am attempting to get the site runnning as fast as possible. If you are experiencing slow page load times, please report it.
- Joined
- Feb 18, 2021
Brandon does the quarterly update on the 50 and doesn't even shoot it lol
Also, it's a prototype so obviously it's gonna be rough around the edges but nobody bothered to get the buffer piece to align with the "rails"?
- Joined
- Jun 25, 2020
Is he STILL pushing this fucking thing? That will never actually happen. I mean, this guy is such a fuck up that he had to get his AKs outsourced to Lee Armory before people started suing his dumb ass.
Serbian Peacekeepers
kiwifarms.net
- Joined
- Dec 12, 2020
What else does Brandon do that requires his attention from the ak 50? He says it isn't a full time project so what is his full time project , gun meme review?
also nice thumbnail brandon , really accurate to a video that you spend inside the entire time.
wopirish
kiwifarms.net
- Joined
- Jan 19, 2020
I would shoot SLAP rounds out of the rn-50 before i shoot anything from the ak-50.
As for the buffer piece and the rails he might actually believe he can get away with the tolerances of an ak scaled up on something that fires 50 bmg. which if that is the case, refer to my previous statement.
As for the buffer piece and the rails he might actually believe he can get away with the tolerances of an ak scaled up on something that fires 50 bmg. which if that is the case, refer to my previous statement.
- Joined
- Jun 25, 2020
I know someone that worked for him. Brandon spends 90% of his time goofing off and being a frat bro. He has no idea how to run a business or a brand, much less a fucking gunsmithing shop.
Grave Ghost
kiwifarms.net
- Joined
- Feb 2, 2021
That would explain why they never got back to me with a quote for a custom AK I wanted.
- Joined
- Jun 25, 2020
You might as well contact Lee Armory directly because thats who he would have foisted it off on.
Grave Ghost
kiwifarms.net
- Joined
- Feb 2, 2021
Don't they have very spotty realibilty and quality when it comes to their AKs? An aspect The AK Guy wanted to fix with American made AKs? Also does Brandon actually run the company, my understanding was that he was basically the public face and not much else.
- Joined
- Jun 9, 2016
Lee Armory started as a kit builder and went full-time. good work, and individual testing and a no-questions-asked warranty in my limited experience and the experiences of some customers and friends who've tried a couple of their Romanian Classic AK's and AMD builds.
be aware that they are kit guns though, don't expect a correct AK (mismatched parts here or there), but rather, one that works quite well for a fair price. a step up from a WASR or C39 in most ways. the receiver is well designed and made as well, and fitted for the parts installed. if you are into modifying or accessorizing your rifle, you might want to get it done by Lee from the get-go rather than after market.
- Joined
- Apr 18, 2019
It's lined up, there's just a lot of unnecessary slop with its contact to the rail exacerbated by the weight of the springs.
Honestly if he's afraid of it blowing up, he could always take the bitch way out and allow for some blow-by in the bore to reduce firing pressure.
- Joined
- Jan 3, 2017
Moving to Texas? I honestly think he doesn't even want to work on it anymore but there's this whole horde of internet autists who are obsessed with the damn thing. Hell when he did a video about KB almost dying when his 50 blew up his comments got swarmed with people whining about how Brandon was going to use it as an excuse to not work on the AK 50.
Serbian Peacekeepers
kiwifarms.net
- Joined
- Dec 12, 2020
Brandon dug himself this hole he can climb out of it , probably.
- Joined
- Jan 17, 2021
I don’t know much about the details of his business but I would agree that he is the face and nothing else. Not that it matters since apparently his business can’t actually build a quality AK to save their life.
- Joined
- Feb 26, 2019
Hererra reminds me of the guys who read all the hobby/tech mags/blogs, have the top-tier gear & can talk the talk; but whenever anyone invites them to a build-athon or meet, never actually touches anything, and instead just hang around kvetching & expounding.
Last edited:
- Joined
- Jun 25, 2020
The lesson with Brandon, InRange, Mac, Garandthumb, IV8888, etc is don't trust YouTubers or the shit they sell.
waffle
kiwifarms.net
- Joined
- Jun 6, 2013
But what if Cokeman starts selling bails of old phonebooks?
- Joined
- Jun 25, 2020
Well, that's just good body armor at a good price.
ellroy
kiwifarms.net
- Joined
- Feb 2, 2021
Side story time:FPC posted this on IG. It was not well received and the post is being ratio'd
View attachment 2195059
Login • Instagram
Welcome back to Instagram. Sign in to check out what your friends, family & interests have been capturing & sharing around the world.www.instagram.com
Bonnie Rotten used to appear at a strip club off of highway 50 in Rancho Cordova, California. She used to do “shows.” Someone I knew went there one night and somehow, for $200, got to suck on her rancid tits.
2A community doesn’t need more degenerates like her taking public spotlight.
Worth the double post if I get to show off Karl’s latest faggotry.
Last edited by a moderator:
- Joined
- Apr 13, 2021
Holy shit he got so absolutely murdered in the comments the post is completely gone i cant find it anywhere.