Mega Rad Gun Thread

  • Want to keep track of this thread?
    Accounts can bookmark posts, watch threads for updates, and jump back to where you stopped reading.
    Create account
Falcos_Commisar said:
Soon enough I'm sure.

That said a possible even BETTER anti drone weapon would be micro missiles.

Take a RPG-7 launch tube, make a small maneuvering fire and forget missile to fit in it, clip on a sight that can feed the missile targeting data and viola, you get an Omni launcher than can fire HE, HEAT, and Anti drone missiles easily.

Remember, an anti drone missile can be smaller than a HEAT warhead and only needs to have a 1-2km range and 2-3km of altitude. Seeker could be EO or maybe a really simple radar guidance system. 1-2kg HE frag warhead and a proximity/impact fused system and you're set.

Estonia is already developing a small 50cm long "micro missile" exclusively for anti drone use.

For bigger or further away threats a Stinger class MANPADS or a APKWS system is fine.

The era is smaller Anti air / anti drone missiles with large magazine depths are rapidly approaching
Click to expand...
Ive seen them doing stuff with 40mm grenades recently for drone defence. Put a VT fuse in, slap it into a MK-19 on a automated turret, and bam, you have cheap anti drone spam. Turkey developed one as the Şahin counter unmanned air system.
 
Sureshot USA has recently shown off an Americanized Version of the SAG-RU Monolithic chassis system which they call the flat top. Installation necessitates the removal of at least portions of the RSB
1743257086712.png

They've also shown off 8 slot lower rails in their "slim" configuration (requires removal of the handguard retainer)
1743257151898.png

After seeing it floating around for some time now, I have finally recently identified a most curious Russian rail system, the Zenitco B-33 dust compatible M-lok handguard "Product 21" by H07 Group. I genuinely think that Zenitco has to be actually retarded or something to still be using their proprietary Basis rail, it's not like the specs for M-lok are secret.
1743257625384.png
1743257647944.png

Install video

Vepr-12 with modified KYPK Handguard
1743257846751.png

Uh Gate Latch bros?
1743257918744.png

Bushmaster captured during the Georgian War fitted with a Zenitco "Joker" rail in use during a shooting competition
1743258287100.png

This Staccato is said to belong to an individual affiliated with Hezbollah
1743258426873.png

1743258454899.png

Pembleton & Sons "G-spot" Glock FRT, The "homeboys" that are "on the block" in "the hood" are gonna love this one. Produces around 1100rpm of semi auto forced reset fire, for $40 with a gen 2 on the way industrious urban entrepreneurs acting as impromptu distributors will make a goodly amount of money to spend on marijuana, "the hoes" and Hennessy brand Cognac.
1743258632241.png

Ukrainian fake nazi of the Gayzov Buttalion with a visor stock and double drum equipped AK
1743258968568.png

9A-91 With prototype grenade launcher
1743259418960.png

Long barrel Stribog A3 that isn't available in America
1743259489214.png

1743259542175.png

Hotchkiss Universal
1743259626957.png

The Highly advanced DIY PCC known as the Rebel-9 has been released to the public
1743259779552.png

1743259915880.png

1743260175697.png

Handmade 50.8lb Punt Gun
1743260476724.png

N3-ST handguard by Russian company "Tactical Ideas". Looks to among other places secure itself by via the installation of a grip
1743260711415.png

Zenitco has new rail components and a new rail kit "Sport-1S". The S refers to the reinforced nature of the 6'oclock rail that instead of their Basis rail has several threaded steel inserts. This was done because apparently there were rare occurrences of Certified Donetsk Trench Raiders torquing their forward grips clean off.


 
So I learned that because of brexit there is a P90 optic made in the UK that can be imported only because of brexit due to previous EU regulations. It is an updated version of the optic designed for the gun, with battery instead of tritium as an option. It gets the lowest bore axis possible on it with the factory rail. I've heard a lot of people like it, others find it restrictive FOV wise and also a pain to zero. It's a prismatic optic so even with astigmatism or related conditions it would be usable. I just find it funny that Brexit is why they can be shipped to the US.


 
Bassomatic said:
Mail it to me.

Funny enough unrelated, had dinner with Poppa Basso. I mentioned I can't get over how many "old guns" I want now. Now I'm "old" I grew up in 90s... I was like lame uzi.. I didn't know guns then ... well whoops.. now I want an uzi..

Unrelated IMI looks like new uzi. I'll built a parts one.

Even before I got into guns and only liked the old things (esp because grandpa was OG snake with a m1) crazy I don't have a FN FAL/ g3.
Click to expand...
The cool part about the Uzi pro is that if you bought a factory pistol brace model (which I did, of course) the brace uses the same hinge as the Micro folding stock, too.

And unlike the micro, you can just pop the stock off whenever you want to just do the Uzi pistol thing without it, for whatever reason. The hinge for the brace is dovetailed into the back of the receiver and held in place by a couple of easily punched out roll pins. If can't sorce a real micro stock, I can just remove the brace and replace it with a pic rail adapter and use that instead.

The Uzi Pro isn't all bad, except for the unknown reason they decided to go with a button release instead of the old Uzi release, making all the surplus mags incompatible without cutting the new mag catch into them.

I'm glad I picked one up when I did. I correctly judged that they would eventually stop being imported and go retarded, just like the real full size Uzi's made by IMI. I'm not spending over $1k for a Vector Uzi, fuck that.
 
Yours Truly 2095 said:
Seems the CMP is making new production Garands or experimenting with them?

View attachment 7152372
Click to expand...

Genuinely curious how this even makes sense economically. There's no way these are going to sell for less than $2000 a piece.
What I'm 100 percent certain is the reaction to the secondary market say 5 years from now:

RARE! GRAIL GUN! L@@K!!!
BRAND NEW PRODUCKTION M1 GRAND MADE BY CMP WITH PAPERS AND CERTIFICATES
TACK DRIVER AND SHOOTS GREAT!
NEVER ONCE FIRED!
$5500 FIRM
MONEY ORDERS ONLY
NO LOWBALLS OR TIREKICKERS
WILLING TO TRADE FOR KORTH REVOLVET OR THOMPSON MACHINE GUN
I AM A CLASS 3 DEALER BASED IN PA AND I KNOW WHAT I GOT SO DON'T WASTE MY TIME



Not: uzi fal heckler and koch h&k m16 colt steyr aug g3 mp5 glock s&w beretta 92fs m9 fnh fn herstal minime m249 m240
 
Baked Al-Aqsa said:
Genuinely curious how this even makes sense economically. There's no way these are going to sell for less than $2000 a piece.
What I'm 100 percent certain is the reaction to the secondary market say 5 years from now:
Click to expand...
I'd assume they're hoping to make new receivers for all their spare parts as a way to supplement the CMP orders with a "not necessarily historical Garand for the sake of having a Garand" option, but you're probably right and it's going to be exactly like the 1911 debacle where people buy to sell rattletraps with a 300% markup.
 
Baked Al-Aqsa said:
Genuinely curious how this even makes sense economically. There's no way these are going to sell for less than $2000 a piece.
What I'm 100 percent certain is the reaction to the secondary market say 5 years from now:

RARE! GRAIL GUN! L@@K!!!
BRAND NEW PRODUCKTION M1 GRAND MADE BY CMP WITH PAPERS AND CERTIFICATES
TACK DRIVER AND SHOOTS GREAT!
NEVER ONCE FIRED!
$5500 FIRM
MONEY ORDERS ONLY
NO LOWBALLS OR TIREKICKERS
WILLING TO TRADE FOR KORTH REVOLVET OR THOMPSON MACHINE GUN
I AM A CLASS 3 DEALER BASED IN PA AND I KNOW WHAT I GOT SO DON'T WASTE MY TIME



Not: uzi fal heckler and koch h&k m16 colt steyr aug g3 mp5 glock s&w beretta 92fs m9 fnh fn herstal minime m249 m240
Click to expand...

I had a visceral negative reaction to this post. It was TOO accurate.
 
I'll be called a faggot, a pinko, a commie. But I did get a CMP m1 and not too long ago a few years. I do not enjoy it.
The ergos and ,don't match. I'm sorry. I'm a history buff and was THRILLED to get one. I've shot em before and knew the issues. So having one was just to collect and impress boomers.

it's super they are making new ones because CMP can be kinda a PITA for some sales. This will be pricy but you can get one, and when CMP dries up... they will be GONE.

Also like wise man said... more gun > less gun for options. Fuck it while it's a sin I rather there be a 223 SKS and .380 acp BAR than NOT have those options.

While I've heard people going bigger and VERY hot on the aught six... If made well the newer metals are better... could you picture a nice brand new safe well made 338 Lapua Garand? Because BASED? Sure it'll be 7k but .. it's a fucking 338 gur-hand.

It was 80 in my area first day carried my 1903 :)
 
Bassomatic said:
I'll be called a faggot, a pinko, a commie. But I did get a CMP m1 and not too long ago a few years. I do not enjoy it.
The ergos and ,don't match. I'm sorry. I'm a history buff and was THRILLED to get one. I've shot em before and knew the issues. So having one was just to collect and impress boomers.

it's super they are making new ones because CMP can be kinda a PITA for some sales. This will be pricy but you can get one, and when CMP dries up... they will be GONE.

Also like wise man said... more gun > less gun for options. Fuck it while it's a sin I rather there be a 223 SKS and .380 acp BAR than NOT have those options.

While I've heard people going bigger and VERY hot on the aught six... If made well the newer metals are better... could you picture a nice brand new safe well made 338 Lapua Garand? Because BASED? Sure it'll be 7k but .. it's a fucking 338 gur-hand.

It was 80 in my area first day carried my 1903 :)
Click to expand...
you can easily re-barrel a garand to 9.3x62 or .35 whelen which is quite potent on flesh. just need a new barrel. USGI bolt works with no mods and the clips do too.

it shouldn't be 7k for a new garand. full custom garand builds usually come out at 2,500-3,000 with the only original part being the receiver. even the very nice new build M14's from fulton armory or LRB only cost about 3k for USGI clone rifles with wood.

For a Garand to cost 7k it'd have to be some bespoke engraved blued with best grade wood rifle which the Garand is not and never has been.
 
Bassomatic said:
and ,don't match
Click to expand...
Having a non-matching gun is more historically accurate, people went through this when they got their 1911 orders through. Oh no, the slide is from the '80s and the receiver is from '51, woe is me, I've been bamboozled by the CMP!
Congrats, your gun was used and had to be patched up by armorers multiple times.
 
WhoBusTank69 said:
Having a non-matching gun is more historically accurate, people went through this when they got their 1911 orders through. Oh no, the slide is from the '80s and the receiver is from '51, woe is me, I've been bamboozled by the CMP!
Congrats, your gun was used and had to be patched up by armorers multiple times.
Click to expand...
I agree, 100% I collect because history and I prefer parts guns reworked etc because I also like to shoot!

A rearmored 8 times Mosin no one cares about I can use it, a different gas system into a FN FAL it's still a mo fucking FAL it still kicks ass.. It's not something to hide in a safe. While I have a few firearms in near perfect shape. I want to get out there use stuff share it.

Also even in my passion/hobby. I can be a cheap fuck. I mean when I die mrs basso will be taken care of and she would never sell the guns lol.
 
Bassomatic said:
mrs basso will be taken care of and she would never sell the guns
Click to expand...
That's got to be a comforting feeling. If I passed, I know nobody else in my family is as autistic about guns as I am so they'd all probably be sold. The thought of my MK18 going to someone who will put red anodized parts on it is probably part of what keeps me alive so that it never happens.
 
You must log in or register to reply here.
Back
Top Bottom