Mega Rad Gun Thread

[Good Goyim]

I used a Ramjet on my G45 once and it was fucking awful. Took it off and put the OEM barrel back in and it went back to eating cheap red box eagle 115gr with no issues again. Glocks only see issues when you start removing OEM stuff. Only thing non OEM that lives on that Glock now is the red dot.

Sounds about right. The only aftermarket shit on my 17 are grip texture and night sights.

 

[Baked Al-Aqsa]

Boomercons love to bring up that many historical gun laws were designed to keep guns out of the hands of blacks as if that isn’t based as fuck.

The best way to protect society is to identify criminals and keep them locked up for as long as possible. Glock Switches give us the opportunity to get groids out of the jurisdiction of Soros backed DA’s who think minorities should be allowed to do whatever they want. If we’re lucky Tyrone will get shanked or catch another body in the Bureau of Prisons and never blight society with his presence again.

It's incredibly short sighted thinking like this that we can't buy and sell guns by mail, import restrictions exist, and that carry had to have 3 different supreme court cases to codify it as a right. In any case, poor white people end up getting put away for the mandatory minimum with absolutely no PTI, court leniency, or any sympathy from third party justice organizations. These laws are never going to bring the TND you hope it will.

 

[Taser Confetti]

It's incredibly short sighted thinking like this that we can't buy and sell guns by mail, import restrictions exist, and that carry had to have 3 different supreme court cases to codify it as a right. In any case, poor white people end up getting put away for the mandatory minimum with absolutely no PTI, court leniency, or any sympathy from third party justice organizations. These laws are never going to bring the TND you hope it will.

I didn't say it was going to bring upon TND. I'm not going to shed a tear when groids are busted in DC and NYC for breaking the law however. Furthermore, I distrust anyone who does.

There's very few to zero "poor white people" illegally carrying in these jurisdictions that aren't scumbags themselves. Turns out decent people have a tendency to follow the law.

 

[AncientPhosphur]

The only reason the yoof have switches is because of cheap Glock clones, Chinese imports, and they can’t aim for shit all with switches being imbedded in rap culture. Feel like I read a news story every other day about someone getting busted with a machine gun possession after a previous firearms charge so it’s clear there’s a lock his nigger ass up problem when he carjacks or robs someone with a switch

 

[Taser Confetti]

The only reason the yoof have switches is because of cheap Glock clones

I've seen countless videos of them showing them off - the vast majority are OEM Glocks with a small number being Polymer80's with mystery meat slides and internals. The days of groids using Ring of Fire pistol like Jimenz are long gone bro. Nobody wants to be a broke nigga that doesn't even have a Glock with a stendo and switch.

How the BATFE doesn't have a task force dedicated to flagging and subpoenaing every picture and video of basketball american's flaunting their felonies is beyond me.

 

[Internet-Based Lobotomy]

How the BATFE doesn't have a task force dedicated to flagging and subpoenaing every picture and video of basketball american's flaunting their felonies is beyond me.

The ATF trying to door kick in the ghettos will never happen. They'll just keep relying on the "misdemeanor while felony" trick during traffic stops. Although a Raid style showdown on an entire switched up section 8 housing block would be crazy to witness. I wonder what they'll do if FRTs start becoming popular with the rapper basketball American crowd.

we can't buy and sell guns by mail, import restrictions exist, and that carry had to have 3 different supreme court cases to codify it as a right.

Yeah, pretty much all these are terrible. There are nations where you can't own an AR-15 but you can order some Norinco or Tavor right to your front door. Import restrictions making it unnecessarily harder if not impossible to acquire some kinds of firearms because they come from XYZ nation. Carry, both open and concealed being unnecessarily cucked in certain States. You'd almost forget it was a Constitutional right sometimes.

 

[Taser Confetti]

The ATF trying to door kick in the ghettos will never happen. They'll just keep relying on the "misdemeanor while felony" trick during traffic stops. Although a Raid style showdown on an entire switched up section 8 housing block would be crazy to witness. I wonder what they'll do if FRTs start becoming popular with the rapper basketball American crowd.

Ironically, the perfect time to start having the ATF kicking down ghetto doors would be very soon if Trump's serious about sending troops to Chicago.

Years of pistol braces being legal and most groids are still rocking buffer tubes with the foam on them. You'll be more likely to see beaners associated with cartels adopting FRT's since Hispanics are capable of theorizing a world where they didn't eat breakfast.

 

[WhoBusTank69]

busted with a machine gun possession

It seems more common that those charges get thrown out, especially when they're a felon and it's being used in the commission of a crime(including driving without headlights).
For being such serious business you're more likely to get charged with possession on the basis that it can be stolen if even the ATF knows about it and it's not on your person 24/7.

 

[Big Brutus]

I've seen countless videos of them showing them off - the vast majority are OEM Glocks with a small number being Polymer80's with mystery meat slides and internals. The days of groids using Ring of Fire pistol like Jimenz are long gone bro. Nobody wants to be a broke nigga that doesn't even have a Glock with a stendo and switch.

How the BATFE doesn't have a task force dedicated to flagging and subpoenaing every picture and video of basketball american's flaunting their felonies is beyond me.

You know what I've never seen niggers running? Red dots. Lights, lasers, Hogue grips, switches, I've seen everything there is to see on a nigger's gun, just not red dots. They can't aim for shit.

Ironically, the perfect time to start having the ATF kicking down ghetto doors would be very soon if Trump's serious about sending troops to Chicago.

Years of pistol braces being legal and most groids are still rocking buffer tubes with the foam on them. You'll be more likely to see beaners associated with cartels adopting FRT's since Hispanics are capable of theorizing a world where they didn't eat breakfast.

At this point, you can have what is essentially a short-barreled full-auto rifle without paying/registering via the use of an FRT and a brace. The only thing you'd have to pay to play with is a suppressor, and you don't have to notify the ATF every time you take it interstate.

Yeah, pretty much all these are terrible. There are nations where you can't own an AR-15 but you can order some Norinco or Tavor right to your front door.

There was a guy from Finland showing off his Glock 18C he just got in from Austria the other day. Turns out some European countries are more permissive on machine guns than the US is, and in Finland, you can get a machine gun on a collector's permit.

Import restrictions making it unnecessarily harder if not impossible to acquire some kinds of firearms because they come from XYZ nation.

Among others, the SPAS-12 is pretty rare in the US due to this and the AWB of 1994.

It's incredibly short sighted thinking like this that we can't buy and sell guns by mail, import restrictions exist, and that carry had to have 3 different supreme court cases to codify it as a right.

Once government receives increased power, it is reticent to relinquish it.

In any case, poor white people end up getting put away for the mandatory minimum with absolutely no PTI, court leniency, or any sympathy from third party justice organizations. These laws are never going to bring the TND you hope it will.

Naturally, the federal government tends to only target those who are predictable/aren't likely to put up a fight. Niggers pop each other daily because they're subhuman retards, but it's white supremacists and family men that the feds like to go after because they're less likely to fight back.

 

[Taser Confetti]

I used a Ramjet on my G45 once and it was fucking awful.

One of My G19's has a Ramjet and while it's only ran 115gr Sellier & Bellot and 124gr +p Federal HST (that's all I own and shoot) I've ran into absolutely zero issues. Did you run any other ammo through yours?

 

[WASR96]

One of My G19's has a Ramjet and while it's only ran 115gr Sellier & Bellot and 124gr +p Federal HST (that's all I own and shoot) I've ran into absolutely zero issues. Did you run any other ammo through yours?

It ran my 124gr just fine, but I didn't notice enough of a reason to keep using the thing while it was refusing to feed my normal range fmj.

 

[bookers]

Well my last one tried to kill me so I think I'll shell out the extra $250.

how'd that happen

 

[Boney]

how'd that happen

Snub .357 decided to start shedding pinky nail sized metal shavings off its cylinders. Only casualty was some scrapes of tiny shrapnel in the hand.

 

[sodomy lifestyle]

nub .357 decided to start shedding pinky nail sized metal shavings off its cylinders. Only casualty was some scrapes of tiny shrapnel in the hand.

Curious coincidence, I was just typing the post below.

-------------------------------------------------------

Nevada boomer reviews a particularly shitty revolver:

I couldn't even find a manual online for this hunk of shit, which irks me because I wanted to see how the firing pin is designed.. the way the gun consistently gave a light strike on first double action pull was curious to me.

Getting cut in the face repeatedly by shrapnel is more serious, I suppose the rounds got mangled at the forcing cone, causing debris to shoot out with the projectile as seen in the slow motion? Or maybe there was enough slop at the air gap to bounce lead shavings back at the shooter, don't know?

 

[AGPinochet]

An Absolute legend has for the past couple years been working on his own Ameli (Spanish 5.56 MG-42, it was in Call of Duty: Ghosts) inspired belt fed that he wants to release to the public via build plans




This is, as the text very clearly lays out, the old version that he scrapped because he determined it would be too hard for most people to build


Barrel and trunnion (uses AR barrels with a chopped extension)


Words from the designer's mouth
"I just wanna scream man, Ive been working on a cheap civilian-legal belt fed for 3 years, was gonna call it the AMELI-At-Home (AAH) last year when I had half of a milled-parts prototype finished but decided it wasn't DIY enough so I went and made a sheet metal/printed something or other and every turn took me down the road to MG42 so here is most of the mechanism for the MF26 (if I can even release it next year). It is entirely NON-bent sheet metal parts that bolt together, even the Bolt and Trunnion, FEA analysis suggests it will work in mixed 4130/AR500 parts. The worst part is that it uses a cut-down AR barrel extension but the rest fits together like puzzle pieces as you can see with the bolt"

Glock is trying to make some sales in Brazil of their GR-115
Machine translated brochure images


Article in porchugee

https://www.theguntrade.com.br/mercado/a-glock-tem-um-fuzil-e-a-policia-de-alagoas-pode-usa-lo-em-breve/

Glock is asking $2k plus tax per rifle, so if these ever come here expect to be asked pay $5k for a rollmark (the same dollar amount gets you 2.5 SR-15 Uppers)


The Suppressor on the MCX is allegedly an unreleased Huxwrx dedicated .300 Blackout suppressor
"Um akshually that's their Range 36ti"
No it isn't
1. Looks to have long ovalish depressions as texture instead of raised ridges like the 36ti
2. Doesn't look to have the forward vents near the three protrusion thingies on the end cap (the 36ti has vents on the outside edge of the protrusion thingies, aligned with the splits and sides they have built into them)
3. I can't find the specific MCX-SD handguard in the photo but from what I understand those near universally accept suppressors up to 1.75in diameter. The 36ti is 1.6in. There would be a bigger gap

So unless this is a photo of a scrapped prototype or gen 2 36ti the claim appears truthful

@SinistralRifleman

I recently reminded myself that the Fightlite SCR exists



Something I'd never thought I'd see. PL series pistol with some kind of light mounted thumb ledge


FN Evolys in an Italian SF Armory


Thermal equipped Saiga Sporter in the SMO Zone


Boris Yeltsin playing with a 74u with PBS-4 and LCU-A laser aiming module

Fun Fact: Boris Yeltsin lost his thumb and forefinger because he was playing with a grenade as a teenager, this guy was allowed to run an entire country btw.

Mighty Thai M16 Arrays


AUGA1 with custom thermal mount seized from ISIS in Puntland, Somalia


Aero Precision is maybe not dying from Super Cancer AIDS anymore


Ranger with an ACR




PSA kicked Shield Arms' ass so hard in court they got their patents invalidated. This means that Glock now has no excuse for not making hi cap metal mage for slimline guns

Could anyone tell me what the first machinegun to use starter tabs was?

@Club Sandwich
Do you have any data/anecdotes on the effect cold weather(40F and below) has on machine gun barrel cooling and thus maximum rate of fire over X amount of time. Is this a factor to even consider or is the effect negligible?

 

[74164978231]

Why in gods name would you make a bolt action 380 so bulky and not put a threaded barrel on it?

 

[Akran]

Could anyone tell me what the first machinegun to use starter tabs was?

I am by no means an authoritative expert on the history of starter tabs but probably the Maxim gun.

The 1919 had simple cloth belts but at some point they started adding riveted brass tabs.

Bonus Bergmann MG 15nA, I have no idea if this uses maxim belts. I can barely find photos of it in use and wiki just says it used metal belts (which appears to be false, typical)

 

[Pretend To Imagine]

Why in gods name would you make a bolt action 380 so bulky and not put a threaded barrel on it?

Honestly why go through all the trouble to make that in .380 to begin with? 9mm subs are widely available, and a lot of .45 is inherently subsonic

 

[TheOtherSideofMakeBelieve]

Honestly why go through all the trouble to make that in .380 to begin with? 9mm subs are widely available, and a lot of .45 is inherently subsonic

I do wish there was a cheap(-ish) Welrod-esque pistol in .45, that just seems like the most logical option if you're not going for a clone. I can't imagine it would be that hard to give it a swappable barrel and bolt for a 9mm/.380 option as well

 

[Internet-Based Lobotomy]

lasers

That one nigger rapper that shot himself in the head on video had a laser on his gun. I'll try to procure the video if you'd be interested in seeing that. It's probably in one of the death related threads or maybe even posted here a while back.

Absolute legend has for the past couple years been working on his own Ameli (Spanish 5.56 MG-42, it was in Call of Duty: Ghosts) inspired belt fed that he wants to release to the public via build plans

This seems like a really cool project. The use of sheet metal is particularly nice because most people in that sphere seem to forget you can do more than just 3D print monolithic pieces for their designs.

Nevada boomer reviews a particularly shitty revolver:

Wow, I shot a .38 by Charter Arms before and my face caught some shrapnel from it a few times in one cylinder. Needless to say after that I didn't care how cheap it was.