Stable Diffusion, NovelAI, Machine Learning Art - AI art generation discussion and image dump

  • 🐕 I am attempting to get the site runnning as fast as possible. If you are experiencing slow page load times, please report it.
Mad at the Internet
sunset__sun_behind_ocean_____clear_sky_____dark_sky_Seed-887498_Steps-25_Guidance-7.5.jpeg
Stable Diffusion (1.4)
Prompt:
sunset, sun behind ocean, (((clear sky))), dark sky

Negative prompt:
[[[no clouds]]], [[[beach]]], (((light sky)))

Seed: 887498
Steps: 25
Guidance: 7.5
How do I make the clouds disappear? I have tried (((clouds))) (((no clouds))), [[[clouds]]] and [[[no clouds]]] in negative prompts.
 
Mad at the Internet
View attachment 4416440Stable Diffusion (1.4)
Prompt:
sunset, sun behind ocean, (((clear sky))), dark sky

Negative prompt:
[[[no clouds]]], [[[beach]]], (((light sky)))

Seed: 887498
Steps: 25
Guidance: 7.5
How do I make the clouds disappear? I have tried (((clouds))) (((no clouds))), [[[clouds]]] and [[[no clouds]]] in negative prompts.
I -think - I see your problem.


[[[no clouds]]], should be (((no clouds)))
And the steps should be a bit higher.
These are run at 40 steps and Euler A.
I'm gonna run it again when I get back, try DIMM and KARAS.

The prompt with Kotos what I was using at the time.

00000-3692448385.png00001-3692448386.png00002-3692448387.png00003-3692448388.png
The Prompt with 1.5, as I don't have 1.4 for some reason...

00004-3692448385.png00005-3692448386.png00006-3692448387.png00007-3692448388.png
 

Attachments

  • 00000-3692448385.png
    00000-3692448385.png
    376 KB · Views: 10
Dreamlike Photoreal 2.0 seems to fix a lot of the anatomy problems that other models have. I tested it by making some Disney princess as they would look in real life, including:

This mermaid:
200425-2438522894-Stunning full color photo of Ariel from The Little Mermaid, beautiful, ((pre...jpg

This French beauty:
200426-2438522894-Stunning full color photo of Belle from Beauty and the Beast, beautiful, ((p...jpg

This Arabian lady:
200430-3421275963-Stunning full color photo of Princess Jasmine from Aladdin, beautiful, ((pre...jpg

This unusually long haired gal:
200444-2344765983-Stunning full color photo of Rapunzel in a tower, beautiful, long blonde hai...jpg

This very cold dame:
00136-1919493136-Stunning full color photo of a Elsa from Disney's Frozen, beautiful.jpg

This Pacific Islander broad who is friends with Dwayne "The Rock" Johnson
00141-251023656-Stunning full color photo of a Moana.jpg

This brave Scottish Lass:
00006.jpg

The German girl who lives with seven dudes (kinda sus):
00135-2775384828-Stunning full color photo of Snow White, beautiful, photograph, narrow waist,...jpg
 
Dreamlike Photoreal 2.0 seems to fix a lot of the anatomy problems that other models have. I tested it by making some Disney princess as they would look in real life, including:
How does it handle non-standing poses? There's quite a few models that can do standing poses very well, but if you get someone to sit down they still occasionally grow a third leg and let's not discuss what happens when they lie down.
 
View attachment 4414256
I made this and posted it on the Fediverse less than a week ago and in that time it's gone viral and spread and so far over the capital I Internet that it's made it's way back here and Kiwis have posted it in multiple image threads without even knowing where it came from. It's been interesting to see how it's been edited as it's been passed along: scaled up, saturation boosted, text altered, and translated to other languages. A guess then it fits the real definition of a "meme" then, eh?
I told you like a month ago that you were getting attention on /g/ and you were gonna get e-famous.
I always believed in you. 😎❤️

Can someone get me up-to-date about AI music? Has anything better than Riffusion and Jukebox came out?
 
maybe this is common knowledge but i've never seen it mentioned: i just noticed that if you right click on the generate button in webui there's an option to generate forever. it will keep making pictures until you tell it to stop so you can leave it running overnight or whatever. pretty cool
 
maybe this is common knowledge but i've never seen it mentioned: i just noticed that if you right click on the generate button in webui there's an option to generate forever. it will keep making pictures until you tell it to stop so you can leave it running overnight or whatever. pretty cool
Even though my system has adequate cooling, I think of that as the "cook meats on my GPU" button and thus never use it. I worry that should I generate very large volumes of images between reviewing sessions I'll spend even less time looking them over and picking out the interesting ones I really want to see more of in higher resolutions with different samplers.
 
  • Agree
Reactions: Puff
Even though my system has adequate cooling, I think of that as the "cook meats on my GPU" button and thus never use it. I worry that should I generate very large volumes of images between reviewing sessions I'll spend even less time looking them over and picking out the interesting ones I really want to see more of in higher resolutions with different samplers.
i've never really seen my gpu go over ~55 or so while generating so i assume it would be fine? it's an older gpu so it takes around a minute per image so for me this would be great
 
Even though my system has adequate cooling, I think of that as the "cook meats on my GPU" button and thus never use it. I worry that should I generate very large volumes of images between reviewing sessions I'll spend even less time looking them over and picking out the interesting ones I really want to see more of in higher resolutions with different samplers.
Modern video cards are usually smart enough not to set themselves on fire these days with a couple exceptions (*cough cough RTX 4090). Even if you use overclocking software like Afterburner, you can generally set a thermal cap to limit how much heat you get. It kind of has training wheels to prevent you from doing anything too stupid.

You really have to go out of your way to brick your machine even by overclocking, and if you don't do that, the default settings aren't going to let you mess things up.
 
  • Like
Reactions: Hair and Nails
I'm training a hypernetwork for the first time.... I might be overplaying my hand on the graphics card... 2 seconds per iteration for at least 10k...
Anyone else done one of these? I'm following the voldy guide, but tips and tricks not covered there would be appreciated.
Edit: first question: It stops when it tries to make a sample image. No crashes, no errors, just stops and waits like it's done with it's task without any notification.
 
Last edited:
I'm training a hypernetwork for the first time.... I might be overplaying my hand on the graphics card... 2 seconds per iteration for at least 10k...
Anyone else done one of these? I'm following the voldy guide, but tips and tricks not covered there would be appreciated.
Edit: first question: It stops when it tries to make a sample image. No crashes, no errors, just stops and waits like it's done with it's task without any notification.
What gpu do you have? You very likely don't have the computational power to do it, hypernetworks are said to require at least 4gb of video memory
 
What gpu do you have? You very likely don't have the computational power to do it, hypernetworks are said to require at least 4gb of video memory
1080ti, it's got 8gb I think... It IS training networks... I'm running the backups right now to see how it's coming along.
Either I've fucked up the settings or something is fucky with the preview feature. It gets to when it's supposed to output a preview and just stops.
The command line is left displaying the "loading weights" message, but you can carry on and generate images or start the training again, in which case it picks up right where it last saved (which is when I have it trying to generate an image). If you disable the preview generation it carries on like intended, saving backups at the specified step count.
 
1080ti, it's got 8gb I think... It IS training networks... I'm running the backups right now to see how it's coming along.
Either I've fucked up the settings or something is fucky with the preview feature. It gets to when it's supposed to output a preview and just stops.
The command line is left displaying the "loading weights" message, but you can carry on and generate images or start the training again, in which case it picks up right where it last saved (which is when I have it trying to generate an image). If you disable the preview generation it carries on like intended, saving backups at the specified step count.
It's likely just shitting the bed, I've heard other people say the 1080ti will crash on SD
 
Back