Mega Rad Gun Thread

[MrJokerRager]

Anyone know of any kind of acute angled grips that resemble the shallow angled FG-42 style grip.

View attachment 2985737
Pic of the haul seized from some possibly-radioactive "protesters" at the Coutts US/Canada border crossing.

https://globalnews.ca/news/8618494/alberta-coutts-border-protest-weapons-ammunition-seized/

I was wondering about this meme and realize why it was a glow op.

 

[Filthyphil]

Red dot on. Non chinesium

 

[MrJokerRager]

What is it about Californian liberals that they want to go full retard like the ATF.

For anyone familiar in LE or DOJ in relation to enforcing laws, when some investigators look at a company, do they do it selectively or go full throttle and look at al the products sold by a company.

This is bad.

This is good.

Also to give a taste of Calguns, here is a thread dedicated to the whole drama behind it.

https://www.calguns.net/calgunforum/showthread.php?t=1761300

And then we got soy cucked faggots time to time who ask how to change a 30 round magazine to 10.

Cheap ass pussies can't sacrifice some of the ammo bill to buy 10 round pmags and probably think Newsom will give them brownie points and a medal for it.

Edit: the same poster above, now blackpills further.

 

[Pocket Dragoon]

Anyone know of any kind of acute angled grips that resemble the shallow angled FG-42 style grip.

View attachment 2989834

Just saw this in the calguns thread @MrJokerRager. First time I've seen anything like that, figures it'd be from California. At least it's not as horrific or cucked as most options are there.

 

[MrJokerRager]

View attachment 2994645
Just saw this in the calguns thread @MrJokerRager. First time I've seen anything like that, figures it'd be from California. At least it's not as horrific or cucked as most options are there.

If the company that makes that grip, made it in full polymer with textures and no holes, it would probably be the best featureless grip that would put the Sparrow to shame. It is the best grip outside of the Thorsden Custom or Sparrow. Though when will some company have the will to go for a FG42 style angled grip would be something. The main criteria is if the webbing of the hand wraps around the top of the trigger and it seems like this one does. But the retarded and futile arguments over what is the CA DOJ is thinking is another story plus the doompilling by one dude in there.

Also which one of you did this?

https://thestingertools.com/collections/novelty-finger-sight-set

 

[Pocket Dragoon]

If the company that makes that grip, made it in full polymer with textures and no holes, it would probably be the best featureless grip that would put the Sparrow to shame.

I'd be tempted to fill in the holes with something like epoxy, or G10 carbon fiber. Or maybe even some pieces of dark or stained wood, along with a wood laminate stock & handguard.

 

[WinchesterWhiskey]

What is it about Californian liberals that they want to go full retard like the ATF.

For anyone familiar in LE or DOJ in relation to enforcing laws, when some investigators look at a company, do they do it selectively or go full throttle and look at al the products sold by a company.

This is bad.

View attachment 2993823

This is good.

View attachment 2993825

Also to give a taste of Calguns, here is a thread dedicated to the whole drama behind it.

https://www.calguns.net/calgunforum/showthread.php?t=1761300

View attachment 2993833

And then we got soy cucked faggots time to time who ask how to change a 30 round magazine to 10.

Cheap ass pussies can't sacrifice some of the ammo bill to buy 10 round pmags and probably think Newsom will give them brownie points and a medal for it.

Edit: the same poster above, now blackpills further.

View attachment 2994045

These limp dick nigger retards always want someone else to do the outreach work for them, but ask them to do it and it's excuse after excuse. It goes further than the anti gun politicians who pass this shit, it's the general apathy of the firearm community and the American exceptionalist mentality of "Oh, governments doing awful shit could never happen here!"

It starts from the boomer afraid to "have his name on a list" despite having a home address and receiving social security, but when it comes down to trying to speak out in forums outside the net, they do nothing. They openly talk about and wish for a civil war and "wishing the nigger who broke into his house did it in mine", to the way the zoomer who spends too much time watching TFD videos and making fun of people who bring new shooters into the hobby because "we're gonna have a revolution anyway, why would I need to do that?"

The firearm culture is self cannibalizing, getting angry at those trying to make a positive difference, stabbing those in the back who mean well, and causing those who do mean well to not want to be near it anymore, leading to the same cycle and feedback loop the anti gun niggers use.

But what the fuck do I know? I'm an idiot who scribbles shipments in on a spreadsheet after a few years of trying to make things right.

 

[POWER IN MISERY]

i'm feeling a little funny and i'm thinking about ordering these 12ga flechettes

edit: having accessed the database i've learned they're not even remotely decent rounds

 

[Filthyphil]

Dug out the halo's
Always feels good to hit that button

 

[Bassomatic]

i'm feeling a little funny and i'm thinking about ordering these 12ga flechettes

Get drunk and load your own for 12g, you can have SO MUCH FUN.

I just pressed 2 dozen 7.7 jap. Speaking of, may I consult and bother the expert @Club Sandwich So I've read a lot on ww2 and apparently the Japs, had no problem stealing 303 brit and using them in type 99s, if you look at both rounds it's incredibly close on CPI etc.. Now I'm not starving and staring at a deer with just a 303 bullet or fighting the last wave of zombies etc, so I won't risk my nice 99 or mk4 with a 7.7

But was this OG fudd lore, what's your take? Also they chamber fine... yes I tried.
If I had a beater SMLE or 99 I'd try with a long string.

 

[Club Sandwich]

OG fudd lore, what's your take?

the 7.7x58mm Arisaka is rimless and has a nominal land to land bore of 0.312". the .303 British (7.7x56mm rimmed) is rimmed, with a nominal bore diameter of 0.311". now many Enfield rifles were closer to 0.3115" or 0.3117" to allow dirty ammunition to be used safely with minimal effort on the part of a soldier, but while the bullets are the same (or near enough to be the same) the cartridges themselves were not. the rimless Arisaka cannot be extracted and will fire-form in the Enfield, while the rimmed .303 British will not even chamber in a Type 99 Arisaka rifle - the rim on the .303 British will catch the feed ramp and prevent chambering.

what is true is that the Japanese-produced Type 89 (licensed Vickers MMG) and Type 92 machineguns used the Type 87 7.7x56mm rimmed cartridge (a semi-rimmed variation was also in use), a licensed copy of the Kynoch .303 British cartridge. and if you are into reloading, you can reload your 7.7mm Arisaka cases with .303 bullets safely (keeping in mind to use reasonable powder charges). it is easier to convert the Type 99 for more common rimless designs (8mm Mauser, .30-06 Springfield) than .303 British due to the rim.

someone might ask why the Japanese did this, and it's because they had the tooling and machinery to mass produce the ammunition and the Vickers already, however a more expedient rifle replacement for the Type 38 as required and by the time the Type 99 was in mass production, the Pacific War was well underway and most rifles were fairly rough in finish. a rimless cartridge was chosen probably to save costs on production of bullets (standardization) but to also allow expedient, simpler magazine/charger design for the rifle itself.

 

[Bassomatic]

You are a hero and gentleman (or woman) I thank you kindly.

 

[MrJokerRager]

the 7.7x58mm Arisaka is rimless and has a nominal land to land bore of 0.312". the .303 British (7.7x56mm rimmed) is rimmed, with a nominal bore diameter of 0.311". now many Enfield rifles were closer to 0.3115" or 0.3117" to allow dirty ammunition to be used safely with minimal effort on the part of a soldier, but while the bullets are the same (or near enough to be the same) the cartridges themselves were not. the rimless Arisaka cannot be extracted and will fire-form in the Enfield, while the rimmed .303 British will not even chamber in a Type 99 Arisaka rifle - the rim on the .303 British will catch the feed ramp and prevent chambering.

what is true is that the Japanese-produced Type 89 (licensed Vickers MMG) and Type 92 machineguns used the Type 87 7.7x56mm rimmed cartridge (a semi-rimmed variation was also in use), a licensed copy of the Kynoch .303 British cartridge. and if you are into reloading, you can reload your 7.7mm Arisaka cases with .303 bullets safely (keeping in mind to use reasonable powder charges). it is easier to convert the Type 99 for more common rimless designs (8mm Mauser, .30-06 Springfield) than .303 British due to the rim.

someone might ask why the Japanese did this, and it's because they had the tooling and machinery to mass produce the ammunition and the Vickers already, however a more expedient rifle replacement for the Type 38 as required and by the time the Type 99 was in mass production, the Pacific War was well underway and most rifles were fairly rough in finish. a rimless cartridge was chosen probably to save costs on production of bullets (standardization) but to also allow expedient, simpler magazine/charger design for the rifle itself.

Any idea as to where one can get a heavily angled FG-42 style grip for the AR-15?

These limp dick nigger retards always want someone else to do the outreach work for them, but ask them to do it and it's excuse after excuse. It goes further than the anti gun politicians who pass this shit, it's the general apathy of the firearm community and the American exceptionalist mentality of "Oh, governments doing awful shit could never happen here!"

It starts from the boomer afraid to "have his name on a list" despite having a home address and receiving social security, but when it comes down to trying to speak out in forums outside the net, they do nothing. They openly talk about and wish for a civil war and "wishing the nigger who broke into his house did it in mine", to the way the zoomer who spends too much time watching TFD videos and making fun of people who bring new shooters into the hobby because "we're gonna have a revolution anyway, why would I need to do that?"

The firearm culture is self cannibalizing, getting angry at those trying to make a positive difference, stabbing those in the back who mean well, and causing those who do mean well to not want to be near it anymore, leading to the same cycle and feedback loop the anti gun niggers use.

But what the fuck do I know? I'm an idiot who scribbles shipments in on a spreadsheet after a few years of trying to make things right.

This state deserves to be raped by Newsom. Plus some folks on Calguns blaming Texas for trying to be based on abortion, nevermind that California was heavily unbased on immigration during the Trump era.

Also some threads on the latest gun alert happenings in California. I would like to add that Pro 2A liberals will defend this shit by Newsom with coping arguments such as "Obama and Biden haven't taken away your gunz, stop with the NRA fearmongering" and all that faggoty shit.

Gavin Newsom unveiled new gun control package today - Calguns.net

Gavin Newsom unveiled new gun control package today California 2nd Amend. Political Discussion & Activism

www.calguns.net

2022 SB 1327 Hertzberg - Firearms: private rights of action (SB8-like Private Suits) - Calguns.net

2022 SB 1327 Hertzberg - Firearms: private rights of action (SB8-like Private Suits) California 2nd Amend. Political Discussion & Activism

www.calguns.net

 

[Club Sandwich]

heavily angled FG-42 style grip for the AR-15

California Compliance Grip | Ledesma Arms

DESCRIPTION: L.A.M. Rifle grip which holds the web of your fingers above the trigger line. Available in Black and in Tan.

www.ledesmaarms.com

closest of recent manufacture. it also isn't hard to make a simple 3-piece wooden or plastic grip based on the FG-42 prototype grip since it's basically a rotated MG 38 grip with a squared off interface for the receiver. cut to fit.

 

[POWER IN MISERY]

Get drunk and load your own for 12g, you can have SO MUCH FUN

i remember like maybe 5 years back when i had a mossberg and a ton of birdshot i started playing ameteur handloader with shit lying around. i loaded one shell with dimes, one with a metal chain, i chopped up a carrot and put them in a shell, i think i fit some triple A batteries in one...
maybe you're right

 

[Bassomatic]

Speaking of shot I have 100 fresh rounds of 7.5 shot, imho it's the BEST weight for lighter game birds. I adore grouse, such a good meal.

Funny enough, I was at wally world (walmart) and the ONLY ammo they had was 22 (marked up not too bad but still). Wal mart used to many years ago bulk buy off suppliers, and I could find some niche and or werido shit there, next to the 30-30 for our hunters or 12g... you'd find 300 BLK (when that was hot new and tactialcool only) or 375 H&H. Was always fun and I used to clean out any time they got 303.

 

[Particle Bored]

i remember like maybe 5 years back when i had a mossberg and a ton of birdshot i started playing ameteur handloader with shit lying around. i loaded one shell with dimes, one with a metal chain, i chopped up a carrot and put them in a shell, i think i fit some triple A batteries in one...
maybe you're right

 

[Particle Bored]

Anyone know anyplace else that sells pre-pinned/welded 9mm AR barrels like this, that have more than 5in actual rifling? This one has 10in of rifling and I dig it for a 9mm upper build but these guys have been out of stock for a while.

Super Feed 10/16 Barrel AR15-9mm | Taccom3g

Barrel is designed around traditional 1911 barrel with both top and bottom feed ramps.

taccom3g.com

I've found stuff like these from Odin Works (I may have seen something similar from Faxon), where they pin a 16in aluminum shroud around a 5.5in barrel, but that's barely longer than my G34 barrel and the Taccom 10in would give a bit extra punch, and the "brake" has a bit more pizzazz than the Odin. (they also have a 13/16 model that's also out of stock, but I like the 10/16)

I guess another option would be getting a 6in brake and having it pinned to a 10in barrel myself, but 6in brakes aren't easy to find either, and I'd rather save the time/cost of a pin/weld job.

 

[Blasterisk]

Anyone know anyplace else that sells pre-pinned/welded 9mm AR barrels like this, that have more than 5in actual rifling? This one has 10in of rifling and I dig it for a 9mm upper build but these guys have been out of stock for a while.

Super Feed 10/16 Barrel AR15-9mm | Taccom3g

Barrel is designed around traditional 1911 barrel with both top and bottom feed ramps.

taccom3g.com

View attachment 3006948
View attachment 3006963View attachment 3006966

I've found stuff like these from Odin Works (I may have seen something similar from Faxon), where they pin a 16in aluminum shroud around a 5.5in barrel, but that's barely longer than my G34 barrel and the Taccom 10in would give a bit extra punch, and the "brake" has a bit more pizzazz than the Odin. (they also have a 13/16 model that's also out of stock, but I like the 10/16)

I guess another option would be getting a 6in brake and having it pinned to a 10in barrel myself, but 6in brakes aren't easy to find either, and I'd rather save the time/cost of a pin/weld job.

What specifically is the restriction against a pistol lower or traditional 16 inch barrel in this case? If you want to have a rifle upper it's 16 inches either way.

 

[Particle Bored]

What specifically is the restriction against a pistol lower or traditional 16 inch barrel in this case? If you want to have a rifle upper it's 16 inches either way.

There's effectively no such thing as a (legal) "pistol lower" 'round my neck of the woods.

Re: trad barrel: just looking for something more fun and unique. Gonna bolt it on a Gibbz side-charger.