Mega Rad Gun Thread

  • 🔧 At about Midnight EST I am going to completely fuck up the site trying to fix something.
IMG_3255.jpeg
This is so stupid I want it
 
  • Thunk-Provoking
  • Lunacy
  • Like
Reactions: John Badman, ChampFantana, 56 others and 6 others
John Badman said:
What’s a good pistol mag holder I can throw on a 2 inch molle weave belt? Ideally I want to have a cant angle so I don’t have to fully rotate a magazine 180°. Retention bungee is a plus.
Click to expand...
I really like the HSGI elastic magazine pouches. The plastic clip in the rear can be adjusted for various widths, such as molle webbing and 1.5inch carry belts.

Elastic too to accept lights, Leathermans, double stack mags and single stack. Yet has enough structure for making reindexing easy.

Only in vertical orientation.
 
  • Like
Reactions: Club Sandwich and John Badman
The Dude said:
Speaking of the HK P7, there's a company who is gearing up to start manufacturing them again. I believe they bought the IP rights from HK. They'll be doing classic ones, but they will also be offering more modern options such as light rails and optics mounting. Personally, I'd just want a basic one in either nickel or chrome for when I want something more compact than my 1911 or Staccato. I believe they'll be around $1300 IIRC.
Click to expand...
link?
 
  • Like
Reactions: likeacrackado
BananaHand said:
I really like the HSGI elastic magazine pouches. The plastic clip in the rear can be adjusted for various widths, such as molle webbing and 1.5inch carry belts.

Elastic too to accept lights, Leathermans, double stack mags and single stack. Yet has enough structure for making reindexing easy.

Only in vertical orientation.
Click to expand...
I use a belt mount hsgi taco everyday to carry a knife.
The walls of it are polymer and can be a little pokey if you are carrying a few extra pounds on you but it's easy enough to shift around.
I like it because it accommodates just about any knife even if they don't have a pocket clip and saves wear and tear on my pants.
Kind of a pain to adjust tension wise but once you get it set you can pretty much forgot it.
 
  • Like
Reactions: Club Sandwich
Marvin said:
Do you recommend it? I'm thinking about getting one for shits and giggles.
Click to expand...
It's good if you want a budget .357. I've put a few hundred .38 rounds and 50 .357's through mine with no issues. My only complaint is the front sight visibility.

You can also conceal it well in your pickle suit. They'll never know you're packing.
 
Last edited:
  • Semper Fidelis
  • Like
Reactions: Marvin and Club Sandwich
I'd kill for a new p7 the geek in me wants one in 45 (they only made 6 iirc). Mrs basso isn't mad the new gun buy. She never minds. I can afford it and I have the room (lol no I don't) she doesn't bother me about the mil surp.

I don't ask why it looks like someone dropped a fucking Marshalls AND Burlington coat factory on the floor in our bedroom. It's about balance friends. Found some cheap 303 online! That's a rare bird anymore.
 
  • Like
  • Feels
Reactions: Club Sandwich and MerelyAPlateOfSpaghetti
Post 2021 model LAMG in use with a Ranger
1735313197145.png

Another pic of that Zantos RPD and a Suppressed Swedish K with an Acro
1735314129502.png

1735314153506.png

1735314173204.png

Old Suppressed PM-63
1735314202455.png

New Suppressed PM-63 (and a Hush Puppy Glock)
1735314243578.png

Whenever black guys start doing security for gas stations and the like they always overdo it but in a cargo culty way, like primitive islanders building effigies of aircraft
1735314452643.png


AGPinochet said:
New photo of the Pembleton & Sons Deagle thing
Click to expand...
It went on a diet
1735314657299.png

FBI SWAT
1735314907635.png

I have undoubtedly posted this before but it was probably a long time ago and It's cool. 9A-91 and RMB-93
1735314960181.png

As the kids say, "Goofy ahh RPK-74"
1735315000558.png

Integrally suppressed bullpup mosin in use with a chechen militant
1735315150433.png

And here's two others
1735315366877.png

This one was in use by a Syrian Terrorist circa 2019
1735315682996.png

I don't know what this is, but I don't think it was always the way it is now
1735315729456.png

1735315791092.png

The wonders of Consumer 3D Printing
1735316175287.png

The project is probably on permanent hiatus but there's a guy trying to make a printed 2011 grip work with 9mm AR uppers
1735316636420.png

Another guy wants to build something involving a chopped glock slide serving as a bolt in combination with some kind of roller delay mechanism, the details aren't the clearest
1735317038879.png

Oh and (alleged) Ex-Pill and meth addict who may or may not (allegedly) not be an FFL/SOT is still working on his VSS thing, except, that's a chopped AR BCG with a middling quality weld on it. So yeah, says he'll be at SHOT
1735317180809.png

Speaking of SHOT, Glock and Aimpoint are collaborating on what might be the Acro P3, It's really ugly but will probably direct mount to the slide. Here are some images from a patent site, announcement is the 7th I think.



I think the kids call videos like these analog horror, sad to say, poor girl has definitely been "dun befo'"
 
  • Like
  • Informative
Reactions: World Famous Quasi Payer, Dean Pentel, Rendang and 8 others
did some research on the new P7's. Its called the P7pro.


They bought the license/design/ and left over parts from H&K to build these. as they run out of H&K parts they will be using more of their own. base price is 2,600. once you start adding options like slide serrations or optics cuts etc will cost you 4,000 at least.

they have some pre built P7's on new old stock frames for 2,400. If they market towards the upper middle class and wealthy they probably have a future. if they try to cater to the lower middle class and poor they will fail.
 
  • Informative
  • Like
Reactions: Dean Pentel, Club Sandwich, Bassomatic and 1 other person
Romulus augustulus said:
did some research on the new P7's. Its called the P7pro.


They bought the license/design/ and left over parts from H&K to build these. as they run out of H&K parts they will be using more of their own. base price is 2,600. once you start adding options like slide serrations or optics cuts etc will cost you 4,000 at least.

they have some pre built P7's on new old stock frames for 2,400. If they market towards the upper middle class and wealthy they probably have a future. if they try to cater to the lower middle class and poor they will fail.
Click to expand...
I already simped for the dream of a 45 one, but HK MADE 40s ffs and these guys don't. (I know most of the regulars are already eye rolling because it's coming from me)

>tfw no 10mm

Since I had to say it, it's a VERY stout system, I reload so I know apples to oranges I've put some spicy ass stuff through my dad's it's a heavy pistol as well. It wouldn't be too much work to alter it just to fit the 10 on a 40 frame, frankly I don't see why not. No I don't want to be dis owned and try this on pops. But I think the pistol it self would be fine as a 10mm.

@AGPinochet I love your gun dumps, shine on you crazy diamond.

I was browsing /k/ (it's nothing but bots anymore) and found the most cursed AR I think I've ever seen. I was actually impressed.

https://i.4cdn.org/k/1735072988249598.jpg I dare not link the eldrich horror here, even behind a spoiler. I'm actually impressed they manage to fuck up this well.
 
  • Like
Reactions: Dean Pentel and Club Sandwich
Bassomatic said:
I already simped for the dream of a 45 one, but HK MADE 40s ffs and these guys don't. (I know most of the regulars are already eye rolling because it's coming from me)

>tfw no 10mm

Since I had to say it, it's a VERY stout system, I reload so I know apples to oranges I've put some spicy ass stuff through my dad's it's a heavy pistol as well. It wouldn't be too much work to alter it just to fit the 10 on a 40 frame, frankly I don't see why not. No I don't want to be dis owned and try this on pops. But I think the pistol it self would be fine as a 10mm.

@AGPinochet I love your gun dumps, shine on you crazy diamond.

I was browsing /k/ (it's nothing but bots anymore) and found the most cursed AR I think I've ever seen. I was actually impressed.

https://i.4cdn.org/k/1735072988249598.jpg I dare not link the eldrich horror here, even behind a spoiler. I'm actually impressed they manage to fuck up this well.
Click to expand...
I am gun autistic enough to know that there is a matching handguard to that terrible stock.

stocks-hera-usa-cqr-stock-ar-15-replacement-fixed-stock-mil-spec-polymer-tan-cobratac-sku-7970...jpg
 
  • Like
  • Informative
  • Horrifying
Reactions: World Famous Quasi Payer, Dean Pentel, ChampFantana and 6 others
DocAwe said:
TBH I think that looks pretty awesome.
I just don't want to pay the asking price for the stock set.
Click to expand...
I put together an AR once with that CQR stock. I didn't mind it with the long LoP spacer (sold separately, of course) in place, but the one thing I couldn't stand was the stupid little rubber plug that's used to retain the fire selector detent spring.
 
  • Informative
Reactions: Club Sandwich and WhoBusTank69
What’s some decent cold weather gear like gloves? I have a few 2gun matches coming up in January February and March and those months temps are usually in arctic conditions
 
You must log in or register to reply here.
Back