Mega Rad Gun Thread

The Polaroid Man said:
Damn lucky Dick Cheney wasn’t sharing the hunting grounds with you that day. Also a catastrophic failure with a gun is one of my worst fears with a firearm. You got that divine intervention going for you, brother
Click to expand...
Im not convinced it wasn't Dick Cheney, it was flat desert, brush was ankle high. Where i was it was barren, it was surreal feeling the pellets and seeing dust getting kicked up from pellets getting sucked in the ground and bouncing off while hearing the shot. He had to have been aiming at me, I don't know what his deal was. We weren't aiming at his direction and we were at least 100-150 feet way from him. I ended up watching him pack up and leave, looked to be in his 50s early 60s so I guess it couldn't have been old Dick.
 
  • Thunk-Provoking
  • Like
Reactions: World Famous Quasi Payer, The Polaroid Man, Club Sandwich and 1 other person
Screenshot_20250207-172718_Brave.jpg
 
  • Like
  • Winner
  • Optimistic
Reactions: quaawaa, Buttigieg2020, AFAB and 8 others
  • Like
  • Agree
  • Informative
Reactions: AStupidMonkey, Buttigieg2020, ChampFantana and 3 others
The Dude said:
How are you guys not discussing this? A federal judge has ruled that it is UNCONSTITUTIONAL for Machine Guns to be banned. Bros, this might be it.
Click to expand...
By way of Bruen, it was used as an argument in a single case. This is much more difficult on a national scale though it can possibly be used to help influence it.
Rein in your optimism just a tiny bit. I say tiny bit because Trump is only just putting out an executive order to look into gun rights, including infringements put into place from 2021-2024.
 
  • Like
Reactions: World Famous Quasi Payer, Club Sandwich, Autistic Gunspergings and 2 others
Maori Kiwifruit Growers said:
Can I add an after market safety too? I understand it's like putting a hat on a hat, but I'm the kinda weirdo who will still pull out even if my woman is on the pill.
Click to expand...
The more you complicate the gun, the more useless it becomes for carrying. Think about the situation your are mostly likely to ever use a conceal carrying. Most people would tell you merely racking the slide takes to much time. You really can't have the gun set up in a way where you have to solve the lament configuration to get it ready to shoot. What you need to be aiming for is keeping the gun in a state where you just pull it out and shoot the thing. If you go ahead adding multiple safeties on it, you aren't helping yourself, you are setting yourself up to get shot in the face.
 
  • Like
Reactions: ChampFantana, World Famous Quasi Payer, Autistic Gunspergings and 3 others
What do you guys think about cheapo 1911s I know rock island is the best in a budget but I was looking at the tisas tanker model. My understanding is if you stick with 45acp there shouldn't be any issues since the 1911 was designed for a semi rimmed cartridge
 
  • Thunk-Provoking
Reactions: Dean Pentel and Club Sandwich
Devious Dave said:
What do you guys think about cheapo 1911s I know rock island is the best in a budget but I was looking at the tisas tanker model. My understanding is if you stick with 45acp there shouldn't be any issues since the 1911 was designed for a semi rimmed cartridge
Click to expand...
Tisas and girsan are both turkshit. Dont. If you want a budget 1911 try a used smith or ruger one
 
  • Like
Reactions: Dean Pentel, WhatInTheActualFuck and Club Sandwich
1739029007664.png

Hue Hue Macaco's (Brazilians) continue progressing into the field 21st century artisinal smg production with the continued proliferation of hybrid printed and metallic designs
1739029173945.png
1739029192423.png

9mm FAL conversion using Suomi drums
1739029287217.png

Horrible photos of an AR chopped and modded to take Suomi drums
1739029359367.png

Shitty poopoo photos of Hybrid manufacture .22 pistols seized from a drug rehab facility in New Zealand
"Just In Case" .22 with suppressor
1739029580661.png
And a WIP "Y-22"
1739029623892.png

1739029722878.png

Bullpup Garand
1739029782584.png

FAL with proprietary rail from Idlib
1739029985145.png

1739030019043.png

1739030035433.png

Pyotr Serdyukov, designer of the VSS among other things
1739030121559.png

Swedish belt fed BAR conversion
1739030180772.png

Improvised thompson foregrips
1739030522108.png
1739030540273.png

Experimental Thompson stock
1739030585421.png

double gripped up TP-9 with the special B&T Shoot through bag
1739030776088.png

Coast Guard with M110A3's with the newish URX-6 rails, if you look real close you can see the dimpled barrel
1739030953863.png

1739031070322.png


Literally everything you could ever want to know about the Stoner 63 featuring a real live example

 
  • Like
  • Feels
  • Lunacy
Reactions: AStupidMonkey, Dean Pentel, Club Sandwich and 7 others
AGPinochet said:
1739029722878.png
Click to expand...
More photos including a WIP of the build. This is very old:
Remington 1740 0.JPG
Remington 1740 2.jpg
Remington 1740 3.jpg
Video of that exact gun:
There was also another video where he shoots turkey loads, including talking about it, but that video appears to have been lost to time. I thought I had it saved but it doesn't look like it.
 
  • Like
Reactions: Belgians in the Congo, Dean Pentel, WhoBusTank69 and 2 others
  • Informative
Reactions: Dean Pentel
Devious Dave said:
What do you guys think about cheapo 1911s I know rock island is the best in a budget but I was looking at the tisas tanker model. My understanding is if you stick with 45acp there shouldn't be any issues since the 1911 was designed for a semi rimmed cartridge
Click to expand...
Range toy at best
 
  • Agree
Reactions: Dean Pentel
Engraved Mateba
1739031303343.png

Prototype C-96's with interchangeable barrels
1739031381462.png
1739031393913.png

A guy paid money and went through the NFA process in order to mutilate a crusty Vetterli
1739031481336.png

1739031546846.png

I think I might have stumbled upon the original photo that inspired all the Ruger Standard/NT-4 builds I've disproportionately seen over the years.
1739031679235.png

Rare 12.5in KAC SR-25 DAC (Direct Action Carbine) with SR-25 sized FF RAS-5 (same style of rail used on USSS SR-16's)
1739031803946.png
Here's a video on it from some permacrippled guy (seriously his arm has been in that sling for fucking years)

1739032026179.png

M9 with the special KAC slide lock suppressor
1739032097494.png

Geissele has in limited numbers made MK16 rails that can direct mount M320's
1739032193806.png

Internals of the "Ounce" folding .22 pistol
1739033039405.png

canadian company Lockhart Tactical had at least at one point a plan for a .22 belt fed upper for their proprietary Raven-9 rifle, I cannot find a single image of it that isn't a rendering.
1739033439638.png

An even more than usual abominable Hi-point
1739033683670.png

Molested Mossberg 385
1739033837691.png

An equally molested Ruger American Ranch
1739033919097.png

Hi-point carbine rebuilt with a metal upper among other things
1739034305762.png

You ever seen 3000 AR auto sears before
1739034154918.png

Mock up of a Digital FCS system for AK-12's meant to integrate with the prototype GPR-20
1739034727873.png
1739034790730.png

Lastly we have a rendering for a new Sureshot Armament Concept rifle. Stamped instead of milled receiver, uses a non standard bolt
1739034894360.png

ATF Dummies are rolling out a new Illegal MG reporting and data collection service but because they're stupid they're referring to AK DIAS's as Super Safeties despite showing a DIAS (as confirmed by the dev who designed it, S3igu2) in their reference photo

Starting at 4:25 you can get a good look at a new style of barrel from Outlier Precision, which is some kind of sister company for Arken Optics
Essentially it's a sleeve around the barrel that adds what is essentially the entire length of the barrel (as it is the same as the length of the sleeve) as a massive reflex expansion chamber for suppressors. I see no reason why this couldn't be done with those absolutely massive "Structured Barrels" I brought up a few posts ago.

Hodge has a prototype "Unitized"/Pseudo monolithic upper

Icon Defense, Formerly Mega Arms, who lost a court battle to LMT 11 years ago leaving LMT king of Monolithic Hill, are looking to make a comeback into the market by also bringing a Monolithic upper to market
 
  • Like
  • Horrifying
Reactions: AStupidMonkey, Belgians in the Congo, Dean Pentel and 3 others
You must log in or register to reply here.
Back