Mega Rad Gun Thread

  • Want to keep track of this thread?
    Accounts can bookmark posts, watch threads for updates, and jump back to where you stopped reading.
    Create account
SHIGGSHOGG said:
Front sight is falling off my newest Dagger slide sub 400 rounds, and idk how to tighten it lol. Think I'll just let it buck since my new dot is way the fuck better than irons and I couldn't see it anyways
Click to expand...
You put a red dot on a dagger? Jfc that's like putting a nice Burris scope on a Red Ryder BB gun
 
Hat Trick Medicine Show said:
You put a red dot on a dagger? Jfc that's like putting a nice Burris scope on a Red Ryder BB gun
Click to expand...
I got the SW4 threaded version on sale for like $180 which feels silly to run with a 407c even though I scored that for $170. All on a 3D frame lol, but no issues save for a dud/rock hard primer on some Sterling steelcase. If Glock weren't such fucking faggots with their optics mounting I'd have considered them, but they don't sell separate built slides, and certainly not for $180. Looking at Youtube, seems it's just a screw, and this happens to everybody. My other slide has 3K or so, so at least that ones good.

Dear ol dad put together a .300 BLK and finally got some ammo that he ordered two and a half fucking months ago from some place I forget the name of. Out of the 30 he shot, one was nearly a squib and didn't cycle, but boy was it quiet. What can you expect for reman from a company that takes eons to ship I guess lmao
 
Have you ever wanted to own a hi-point carbine that looks like a crusty tweaker took a rusty hacksaw to the stock before using it to murder an Indian who owns the local 7/11 over $137?
Well Hi-Point Firearms has you covered because they're now offering the 995P pistol with modular pic rail attachments and the ability to accept AR Buffer tubes (the pic rail adapter threads into a buffer tube hole)
1729548847621.png

Ak-12 Obr. 2020 with Sure shot Mk.3 Monolithic chassis
1729549020575.png

Professor Parabellum Hybrid SMG (one of if not his first design to incorporate printed parts) and a giant dog (this photo isn't from the Professor)
1729549373459.png

Bullpup conversion of an "Apple Pie" pump action rifle
1729549579302.png

Might have posted this before but the world can always use more AK-107
1729550137830.png

Concept for an AK Bolt catch from 20 years ago
1729550349862.png

Thread where it was first unveiled

A revolver without even a crude attempt at a front sight is an odd concept
1729550496132.png

Taurus View revolver, who doesn't want a Polycarbonate side plate
1729550654808.png

Surefire quad stack cut down to 40rnd capacity
1729550765486.png

There's like $7000 worth of accessories on this $200 .22lr revolver
1729550967937.png

4lb 23" hunk of metal with a cutting edge from Salem Lakes Armory
1729551330505.png

AGPinochet said:
seriously doubt the Secret Service uses this thing
Click to expand...
Turns out this wasn't even an original concept, an Austrian guy thought up and brought to market a similar design years before they did
1729551838943.png

3D printed take on the concept (It's Illegal, but anyone who would print one of these out while not being able to carry much less conceal it doesn't care about that)
1729552431976.png

Otter Creek Labs now sells an adapter that allows any HUB Compatible suppressor to be mounted using the Ops Inc/Allen Engineering interface
1729552635821.png

Prototype DIY .357 thst utilizes disposable cartridge/barrel hybrid ammunition. You load a .357 cartridge into a sacrificial steel/polymer sleeve and both are ejected as a uniform piece

Magazine
1729552900950.png

1729552936652.png

Russian language video going over the AK-12 Obr. 2023 manual

Wilson Combat has jumped on the Micro-Compensator train



Saga .308 with a Leader Kit

Found a Russian guy who has made wood stocked bullpup conversions for his SVD and SKS
 
Last edited:
MCLOS Horthy said:
Whats up You toob, got a nice SKS here, gonna boil it in cosmoline to get that dank milsurp flavor. Gonna add a custom Tapco stock, yesssssss and a detachable magazine, TMDWU
Click to expand...

Don't forget to electrical tape the scope to it.
 
BallsMcLongDong said:
Welcome to the world of the CZ winners. Enjoy your bulletproof gun, much greater recoil control, and ease of accuracy and shooting. Enjoy the seethe from people who are upset that you have the greatest firearm design of all time.
Click to expand...
I have an SP-01.
They're kinda overrated, imho. Not a bad gun, but put on a pedestal, like AKs, because we couldn't get them for a long time.

Considering where they came from, they're far better than everything else pistol wise out of Eastern Europe.

A Bren Ten is a grail gun.
 
BikeLock said:
I have an SP-01.
They're kinda overrated, imho. Not a bad gun, but put on a pedestal, like AKs, because we couldn't get them for a long time.

Considering where they came from, they're far better than everything else pistol wise out of Eastern Europe.

A Bren Ten is a grail gun.
Click to expand...

I had an SP-01 Tactical years back. I really liked it, but there are other 9mm pistols that I prefer over it.

It still chaps my ass that Vltor never got their Bren Ten released and no one took them up on their offer to buy all the IP, R&D, and tooling and machinery they already had for it to start production on it. It looked like it was going to be a really good pistol, and they were going to offer it in more than just 10mm Auto. I was definitely going to get one. Probably classic stainless and full-size, just like Miami Vice.
 
The Dude said:
Probably classic stainless and full-size, just like Miami Vice.
Click to expand...
i worked with the D&D Bren Ten blank guns doing a some work for the owner (there were only two and one was retained by the producer of Miami Vice, the other sold privately). they were carbon steel with industrial hard chrome and polished, built out of production seconds explicitly for the show and are a little different from the serial production models.
 
Club Sandwich said:
i worked with the D&D Bren Ten blank guns doing a some work for the owner (there were only two and one was retained by the producer of Miami Vice, the other sold privately). they were carbon steel with industrial hard chrome and polished, built out of production seconds explicitly for the show and are a little different from the serial production models.
Click to expand...

Interesting. I always assumed they were stainless. I'm not sure if the Vltor Brens were going to be stainless or hard chromed like you said, but I wanted mine silver and full-size. Vltor was talking about offering them full-size and compact, and with a variety of finishes including two-tone. It was like fifteen years ago, so I don't remember the exact details of the steels they were planning on using and the exact kinds of finishes.
 
i was talking at a friend of mine about how i'd like a larue trigger in my AP5/MP5, found out that could possibly happen with a lee sporting trigger pack and then got scared as i don't trust like that. during this research i saw bill springfield will fuck with your trigger for way, way, WAY less. anyone ever go through slick willy? clubby, you're the oracle, is he good? i'll send him my OEM trigger pack if he doesnt fuck it up. would a timney trigger be the best middle ground?
 
POWER IN MISERY said:
i was talking at a friend of mine about how i'd like a larue trigger in my AP5/MP5, found out that could possibly happen with a lee sporting trigger pack and then got scared as i don't trust like that. during this research i saw bill springfield will fuck with your trigger for way, way, WAY less. anyone ever go through slick willy? clubby, you're the oracle, is he good? i'll send him my OEM trigger pack if he doesnt fuck it up. would a timney trigger be the best middle ground?
Click to expand...
bill does good work but has very long turn arounds typically due to demand. he typically uses solder to build up an area and trim down with needle files as well as performs individual assessments on each gun, which is how it should be done to get the customer what they want rather than depend on a jig and muscle memory or "it feels real nice". the good part is that the sheet metal HK guns are like legeos and you can always just send a spare trigger pack to him and retain the OEM one for warranty purposes or as a spare.
 
Club Sandwich said:
bill does good work but has very long turn arounds typically due to demand. he typically uses solder to build up an area and trim down with needle files as well as performs individual assessments on each gun, which is how it should be done to get the customer what they want rather than depend on a jig and muscle memory or "it feels real nice". the good part is that the sheet metal HK guns are like legeos and you can always just send a spare trigger pack to him and retain the OEM one for warranty purposes or as a spare.
Click to expand...
funny thing is as far as i can tell i can get the timney trigger cheaper than i could get from HKParts. they want about 300 for a standard trigger. HKP seems to be a little ridiculous charging around like twelve hundred for something like a franklin armory binary in a magpul housing they painted the selector switch markings for.
 
Last edited:
Hey question. I want to get my dad a .22 caliber scope for Christmas that's in 3x9. It needs to be cheap but not dogshit. Suggestions?
 
Club Sandwich said:
HKP is a joke for most parts, however when they have a part no one else has, it is what it is.
Click to expand...
They want $70 more for the HK45 LEM parts than HK themselves do from their own website, but HKP has the parts in stock....

Only place around that sells the 15-17rnd VP9/P30 magazine upgrade kits, too. At least they're only $15 (just picked up 9 of them tho...)

But hey, now all of my 15 rnd P30 mags are 17, and I used the followers and baseplate retainers to convert all of my USP-C/P2k mags from 13 to 15 rounds. Would be nice if HKP put together a "proper" kit for them, as I should probably replace the mag springs with the updated 15 round springs, as HK themselves now sells 15 round mags for the VP9sk that use the old USP-C bodies with a baseplate that fits the SK pistols.

If you want small HK parts HKP is pretty much the only game in town...
 
WelperHelper99 said:
Hey question. I want to get my dad a .22 caliber scope for Christmas that's in 3x9. It needs to be cheap but not dogshit. Suggestions?
Click to expand...
Barska's 3-9x 32mm "Plinker-22" (MPN: AC10380) with very little competition that isn't lacking things like coated lenses for anti fog or eye box that isn't an eyelash-checker. an older Nikon P-Rimfire if you can find one might be more ideal and Burris 3-9x "Droptine" is good too although doesn't last long with rough handling, good for bench shooting though.
BikeLock said:
If you want small HK parts HKP is pretty much the only game in town...
Click to expand...
They are the biggest non-HK supplier, but some others are HK's Web Shop, Arms Unlimited, Gatewood Supply, Midwest Gun Works, HK Specialist, RTG Parts, etc. i also order stuff from Europtic or Cherry Imports or directly from some places if you're willing to pay ~$100 in shipping alone.
 
Agares said:
Anyways, I'm gonna gun hack it with some sweet black and green spray paint and some dank plastic cobra grips."
Click to expand...
Since I can't find a cerakoter in my area, I've had intrusive thoughts about using Army Painter spray paint/primer to cover up the dings and scratches in my Wrangler.

My better judgment has thus far prevailed. Distressed is a fine look, anyway.
 
You must log in or register to reply here.
Back
Top Bottom