Mega Rad Gun Thread

  • Want to keep track of this thread?
    Accounts can bookmark posts, watch threads for updates, and jump back to where you stopped reading.
    Create account
I love 38spl. I've got a bunch of hotshot 380, 9mm, 300blk, 357, 44, all the fun stuff. And I've shot a bunch of the hi-tech round. I've always liked 38 spl the most. Has just enough oomph at the end of travel to really do a number on target, but not enough oomph to break my wrist or make quick and accurate follow up shots something to learn and manage. I'll end up giving all my other fancy guns to my sons eventually. Aside from the 1851 navy and this revolver, it'll still be my old man carry. It's just soft shooting and hits really hard. I mostly use LRN, and get pretty good results. I've noticed that the hollowpoints (at least ones I've used at SD ranges) don't expand quite as much as with other calibers, so it's basically the same as just shooting ball ammo.
As firearm tech improves, there's this urge to discount everything that came before.
But LRN 38 from a 2 inch barrel has put a whole lotta people in the dirt, and I'd certainly not want to be on the other end of it.
That's a lot of the reason I went with it for my first pistol; soft shooting, still plenty deadly out of a 2 inch barrel, and it has time tested loads that are well known to get the job done just as well as the fancy new cartridge on the street. Personally like the FBI special 158 grain semi wad cutter HP load from Remington, pic below from a Winchester copy
images - 2023-08-11T052947.520.jpeg
Old but mighty, FBI and police got plenty even if it doesn't bloom, it's still +P and a 158 grain slug going thru you, and you feel that from a J-frame, even a full steel one like mine. Also have 120 grain loads from federal that seem to be ok, but as you said, can't go too wrong with LRN. It'll poke holes with the best of em, and be pretty accurate to boot.

Agreed, .38 spcl out of a .357 mag revolver is a joy to shoot. The DA only 5 shot .357 revolvers become a LOT more manageable with .38 spcl if you're training with them or you don't want early arthritis from a .357 scandium/aluminum/titanium frame revolver rearranging your hand bones
Have not shot a 357 yet, sadly, but it's on the list, and with the added weight, I bet it feels like a toy with 38.
 
That's a lot of the reason I went with it for my first pistol; soft shooting, still plenty deadly out of a 2 inch barrel, and it has time tested loads that are well known to get the job done just as well as the fancy new cartridge on the street. Personally like the FBI special 158 grain semi wad cutter HP load from Remington, pic below from a Winchester copy
Was totally unfamiliar that full lead hollowpoints were available for it. Looks like I need to do some researching. Appreciate you pointing me that way. If you've got the time, check out BuffaloBore. They make small batches of specific ammo for specific circumstances (Low Light Low Flash 38 SPL Semi-Jacketed HP Designed For 2 Inch Barrels) that sort of thing. A bit on the more expensive side, but I've tried out their purpose-built 32 SW in an old top break SW, and a couple of their 30-30 loads in my deer rifle, always impressed. Also one of the only ways to still buy ammo from somebody for all the weird .398 and a 1/2 French Bulldog Squid Penis Thompson Suncracker IndianKiller Rifle Cartridge rounds that old guns loved to be made around.
 
I've tried finding a 9mm that suits me and today I fired a 5.4 Ruger incidentally and loved it. Is the online sperging about 9mm v 5.4 worth anything? Can I kill the Antichrist with 5.4 when he's got a blue helmet on?
 
I've tried finding a 9mm that suits me and today I fired a 5.4 Ruger incidentally and loved it. Is the online sperging about 9mm v 5.4 worth anything? Can I kill the Antichrist with 5.4 when he's got a blue helmet on?
no because you'll be out of money if you practice enough to land headshots
 
well the CMMG .22 kit on my ar is now cracking off two rounds at a time and i don't know why. i swapped out the firing pins and got a buffer tube insert and it still happened
 
well the CMMG .22 kit on my ar is now cracking off two rounds at a time and i don't know why. i swapped out the firing pins and got a buffer tube insert and it still happened
Might be the ammo you're using. I only use high velocity 22lr in mine and it probably allows the blowback action to cycle with more force. If not then try lighter springs for the bolt from BoreBuddy or maybe invest in their adjustable bolt.
That's a shame about yours though. I put 800-1000 rounds through my kit a month and it's worked flawlessly so I'm pretty shameless about shilling them online and to my friends.
 
well the CMMG .22 kit on my ar is now cracking off two rounds at a time and i don't know why. i swapped out the firing pins and got a buffer tube insert and it still happened

I've been having good luck with mine. I had one OOB ignition, the chamber got really dirty running a can. "Spuk-spuk-spuk-spuk-pop..."

It sounds like your CMMG bolt is not returning far enough to reset the hammer, lighten the hammer buy grinding the tail off making it look like a 9mm style hammer, or lighten the hammer spring. I had a 9mm AR kept giving me shit, lot of doubles and triples I ended up just buying a drop in trigger and it fixed it.
 
Was totally unfamiliar that full lead hollowpoints were available for it. Looks like I need to do some researching. Appreciate you pointing me that way. If you've got the time, check out BuffaloBore. They make small batches of specific ammo for specific circumstances (Low Light Low Flash 38 SPL Semi-Jacketed HP Designed For 2 Inch Barrels) that sort of thing. A bit on the more expensive side, but I've tried out their purpose-built 32 SW in an old top break SW, and a couple of their 30-30 loads in my deer rifle, always impressed. Also one of the only ways to still buy ammo from somebody for all the weird .398 and a 1/2 French Bulldog Squid Penis Thompson Suncracker IndianKiller Rifle Cartridge rounds that old guns loved to be made around.
Heard well about Buffalo Bore lol. I'm afraid my revolver wouldn't like it; it's already old, uses a hammer spur, I have to be careful at this point how much normal +p I put thru it, lest I fuck up the timing. But for a new revolver, a nice heavy one? Fuck yeah bro.

BTW, glad i let you know about the glorious FBI load. Its time tested, and no matter how you look at it, its a 158 grain slug blasting thru your target. Police loved the shit out of it, and it's patent free; basically every company has a copy. I will say the Remington varient is a bit smokey, but its very available where im at, and less than 20 for a box. With your longer barrel, you'll have guaranteed expansion
20230813_085027.jpg

Ill say, from a J frame, it stings, but its fully controllable at the same time. Im fully confident if someone snuck up on me, I'd get pretty well every round on target in normal CCW ranges. My hand just wouldn't be happy afterwards. Pick up a box and try it man.
@WelperHelper99 you should try .38Spl thru a Rhino 60DS. Shit's pure comedy. Like shooting a .22.
When I have real money lol. Still saving for that SD40VE. But I fully believe it. The Rhino is a beast
I've tried finding a 9mm that suits me and today I fired a 5.4 Ruger incidentally and loved it. Is the online sperging about 9mm v 5.4 worth anything? Can I kill the Antichrist with 5.4 when he's got a blue helmet on?
It's not that the Ruger 5.7 is bad, or even having a odd caliber is bad, it's ammo costs. 5.7 costs a shit ton rn. You're better served with a 9mm, or if you're feeling adventurous, something a little less common, like 40 cal, to try to be immune to ammo shortages. But realistically, 9mm is fine, just stock up
 
Are any Glock frame pins compatible with the P-10F?
I know there are replacement sets available, but not so easy from my country. We have Glock ones easily available locally but no P-10, North American shops won't ship anything gun-related overseas, Euro and rest of world will but don't seem to have much.
ETA: Also Sold my Glock so can't compare.
 
@WelperHelper99 you should try .38Spl thru a Rhino 60DS. Shit's pure comedy. Like shooting a .22.
Have they fixed the triggers yet? The couple I tried (3" & 5" .357) both had a very heavy Nagant-tier pull in double-action, but otherwise they were an absolute hoot. I don't mind a heavy trigger in general, but on those it felt excessive; although they were also early production pistols so that might've had something to do with it.

But still, a Rhino would be on my short-list when I'm in the market again for another wheelgun, especially if the triggers have been/can be lightened up some, and especially if they're ever offered in bigger calibers; a Rhino in .44 or .454 would be sick.

This was an interesting read:
Seventy-one guns & counting, celebrating the Babe Ruth of Hi-Point collectors
Many people claim to collect Hi-Point firearms, but only one among them has earned a title.
"Mach-O-Melvin," as he refers to himself, is recognized as the owner of the largest Hi-Point® Firearms collection in the world. For good reason, his collection has earned him repute among Hi-Point® collectors on popular group sites and online forums where he has become well-known as the "Babe Ruth" of Hi-Point®.
With 71 guns and counting, you might be asking,"how exactly does someone become the leading collector of Hi-Point® guns?"
We wanted to know too, so we set out to uncover the story behind the fan.
The name Mach-O-Melvin ironically mimics the decades-old industry term coined "MOM," a moniker that denotates the "maker or manufacturer" of firearms—in this case, the Hi-Point® manufacturing plant in Mansfield, Ohio. Though Mach-O-Melvin states the nickname originally came from a CDL driver he knew "way back in the day," we like the coincidental implication of the story. Perhaps Mach-O-Melvin was destined to be the "MOM" of Hi-Point® collectors before he was even made aware of the brand's existence.
Mach-O-Melvin bought his first gun as a young boy with money saved up from a paper route. When an older brother wanted to go hunting and Mach-O-Melvin didn't have a gun to use, he headed out with his mother in response to a newspaper ad to make his very first gun purchase. And that's exactly what he did.
With only $12 to his name and just 12 years under his belt, Mach-O-Melvin purchased his first firearm in 1969: a 12-gauge shotgun, of course.
Decades later, Mach-O-Melvin still carries a deep passion (or, as he likes to refer to it, a severe case of OCD) for guns—particularly Hi-Point® firearms. He recalls his first experience with the brand in 2012 when his nephew, then in the Navy, called Mach-O-Melvin's brother on the phone and asked him for a Hi-Point® for Christmas.
After that initial exposure, Mach-O-Melvin quickly immersed himself in research on the company's values. Once he realized the Ohio-based company that had been around since the 80s had garnered such a devoted customer base and offered a lifetime warranty to boot—he was hooked.
His very first Hi-Point® model was a 995 carbine, purchased in February of 2013. Not long after, he decided he had to have a matching handgun.
In that moment the Mach-O-Melvin collection was born.
At the onset, however, he ran into some jamming issues. This led him to the Hi-Point® Firearms Forum site where he discovered a tight-knit community of fanatics and was able to share his initial experiences with the guns with others who had answers. That, combined with the notable customer service he repeatedly received from the Hi-Point® headquarters, was enough to make him a fan for life.
Mach-O-Melvin Hi-Point collection
Blood, Sweat, Tears, & Seventy-One Guns Later
For four to six hours a day, seven days a week, over the entirety of three-and-a-half years (that's approximately 6,387 hours!), Mach-O-Melvin cultivated his collection, researching every piece of history he could get his hands on. He joined every Hi-Point® forum he could find and even founded a few of his own, notably Hi-Point® Firearms Cafe—a forum for Hi-Point® gun lovers, grandfathers, and God-seekers.
The Maverick JS-9
Hi-Point® fanatics such as Mach-O-Melvin cite the very first Hi-Point® was the Maverick JS-9. It's believed that 6-7,000 of these original models were distributed. But, when Mossberg® Maverick® caught wind of the name, they sent a cease and desist, forcing Stallard Arms to take the approximately 300 already-named Maverick slides left in production and physically scratch out the name.
To this day, finding one of the original 300 scratched-out Mavericks is the ultimate dream of Mach-O-Melvin, and would represent what he considers to be the final addition to his collection. The "scratch-off" is believed to be the Sasquatch...the Nessie...the Megalodon...of Hi-Point® Firearms.
The Maverick was named the JS-9, supposedly after Josie Stallard (mother to Ed Stallard of Stallard Arms) who was better known at the time as the "mother" of the old stomping grounds for her knack of being surrounded by all the neighborhood children. She was so well loved that they decided to name the gun after her.
The Maverick JS-9 started showing up in the mid-80s and exhibits several differences from the C9 that replaced it later in 1994. Because of these slight differences, the Hi-Point® C9 magazines do not work in the old Stallard JS-9s. Back in the day, Hi-Point® used to service these legacy guns and would occasionally sell customers replacement magazines for less than $20 a pop.
Today, these older models remain some of the most respected in the industry. Many are still fully functional, even after decades of use.
When the Hi-Point® name took over the line in 1992, they called the model the JF-9, said to have been named after Jerry Foncannon, Tom Deeb's best friend. This limited-release handgun involved the short issue of only several thousand units. Jerry is said to have worked at the Hi-Point® factory as a truck driver, another testament that many of those who helped in big and small ways to build the Hi-Point® brand from the ground up were either family or close friends.
The Haskell .45
Ed Stallard's best friend growing up was Russ Hill of Haskell Manufacturing, who made the .45 calibers for the Hi-Point® brand. Haskell's first gun was the Haskell .45, otherwise known as the JS-45—a steel frame .45 ACP handgun also believed to have been named after Josie Stallard. It later evolved under the Hi-Point® banner as the JH-45 (named after Russ Hill's oldest son, Jessie Hill) and then the JHP-45, with several improvements accompanying each new edition.
The Iberia .40
Jim Cole of Iberia Firearms was a mold designer/draftsman at the same company where Mike Strassell worked building tooling for Tom's original Model JS. He was soon brought in as the contributor of the .40 caliber, originally called the Iberia .40 and later called the JC-40. Many fan forums cite Jim Cole's son, John Cole, as namesake of the JC-40. Out of Galion, Ohio, they remain Hi-Point's designated hitter for .40 caliber handguns such as the JCP-40.
Nothing Wrong with a Little Friendly Competition
Mach-O-Melvin began collecting Hi-Point® firearms as a direct result of a popular Internet forum for Hi-Point® devotees. After hooking up with a few other Hi-Point® fanatics that were collecting various models, Mach-O-Melvin decided to engage in a little "friendly competition." Looking back, he recalls that one of the men in the group had 17 models, and another had 18—the largest number of Hi-Point® models collected at the time. With limited knowledge of what existed in the market, all three men joked that there were not many more models left to be found.
Meanwhile, Mach-O-Melvin began putting his passion for research and the Hi-Point® brand to good use and went to work locating more and more models. His emphasis, even at the very beginning, was always on finding and collecting the oldest models possible. As Mach-O-Melvin rapidly approached number 25 in his collection, he assumed that would be it. Little did he realize at the time all that actually existed in the marketplace, and how deeply he'd have to commit to locating them!
Worth a Shot?!
We'd say so! He now owns a total of seventy-one (71) Hi-Point® models, each possessing a unique story. Though not confirmed as the official or "final" rundown, Mach-O-Melvin provided his personal "timeline" of Hi-Point® models since the beginning.
Even as we feature this list and bring to light Mach-O-Melvin's hard work and research, we open the conversation to hear from others as to what they believe should be in this list. To date, there has been no exhaustive list recorded anywhere other than what he has carefully pieced together below.
Prior to most purchases, Mach-O-Melvin would talk to Tom Deeb personally on the phone, just to make sure that his research aligned with what he believed to be production history. Tom was always happy to take the calls and spent an egregious amount of time attempting to confirm or refute Mach-O-Melvin's Hi-Point® lineage. Each time, as Mach-O-Melvin recounted his interest in adding to his collection, Tom would ask the same question, "Now, tell me again, why do you want to collect all these guns???"
And each time, Mach-O-Melvin replied with the exact same answer: "Because nobody else is, and because I can."
Archive

And it further goes on to list every single Hi-Point in the collection... which is a lot. I had no idea there were that many.
 
Last edited:
Back
Top Bottom