DocAwe
kiwifarms.net
- Joined
- Jun 23, 2021
Have you tried skateboard tape?
Mega Rad Gun Thread
- Thread starter The Hunter
- Start date
-
Want to keep track of this thread?
Accounts can bookmark posts, watch threads for updates, and jump back to where you stopped reading.
Create account
John Badman
kiwifarms.net
- Joined
- Aug 7, 2024
I bought a shit ton last night for $50.
EggImpregnator
kiwifarms.net
- Joined
- Aug 25, 2020
The FBI released the second Trump assassin's rifle. It did indeed end up being a Bubba'd SKS. However its a lot worse than that. Here's some of the highlight that make it so horrendous
- Gluing the scope rings to the receiver with white Elmer's glue
- strapping the scope to the gun with hose clamps
- wrapping the whole thing in electrical tape (anti reflection?)
- using a cardboard box as a scope shade, on the wrong end of the scope
- being rusted to shit
Yeah, this guy is a certifiable retard.
- Gluing the scope rings to the receiver with white Elmer's glue
- strapping the scope to the gun with hose clamps
- wrapping the whole thing in electrical tape (anti reflection?)
- using a cardboard box as a scope shade, on the wrong end of the scope
- being rusted to shit
Yeah, this guy is a certifiable retard.
- Joined
- Oct 6, 2021
Quiet Shots, Quieter Strikes (as long as you only slash, the worst kind of wounding mechanism for small knives)
Said to be the world's first and only left handed M14 from the 2018 SHOT Show
Ukrainian Militant with Civilian QBZ-97 during the very early stages of the SMO
You've seen Americans with Carry handles on the 3' and 9'o'clock positions on their quad rails, but have you seen Georgians with them strapped to their stocks? (both cases are for retention of the carry handles in case of optic failure, BUIS are an advanced concept)
Syrian Al Qaeda sniper with an Absurd Chassis'd Mosin
The Black Lotus Coalition Dev AG Off Grid (tranny) has developed a variant of his Gremlin .22 pistol that is mocked up as a Hot Glue Gun. Sounds a little Illegal to me even if it follows the law to the letter
Years ago I wrote a very short post about him in the Tranch Thread (Never Forget the victims of the Alpacacaust)
Very poor quality, but VSK-94 with very rickety folding stock (retained by string), non factory suppessor (tubular object behind the scope) and thermal scope recovered in Chechnya.
Norinco QX-04 slide and barrel, the barrel is fluted in the opposite direction of the rifling and exerts opposite rotational force until the bullet leaves the barrel
BEEEG Box
Bullpup Vepr rifle (not the Ukrainian AK Conversion, but a version of the Russian civilian hunting rifle)
Anti-Russian Hitman Timur Makhauri after being detained by Kiev Police. Wearing what looks like a bullet proof vest with two pistols stuffed into it. Glock and Stetchkin with Gold(?) or Brass(?) Hammer. He would eventually be killed in a car bombing
You can learn more about him in this WSJ article
Experimental AK-107 variant with a rail over the counterweight housing and BUIS
Full size version of the AM-17
Sureshot MK.3 Slim (requires removal of the front sling mount) Chassis somewhere in Africa
Lastly we have a video from the Chronically backlogged AGCast regarding the newish developments in the GunCAD World. Highlights include DIY Buffer springs, Gas Tubes, Gas Blocks and even a new Wildcat Cartridge,
WARNING: Terminal Weebery contained inside
Said to be the world's first and only left handed M14 from the 2018 SHOT Show
Ukrainian Militant with Civilian QBZ-97 during the very early stages of the SMO
You've seen Americans with Carry handles on the 3' and 9'o'clock positions on their quad rails, but have you seen Georgians with them strapped to their stocks? (both cases are for retention of the carry handles in case of optic failure, BUIS are an advanced concept)
Syrian Al Qaeda sniper with an Absurd Chassis'd Mosin
The Black Lotus Coalition Dev AG Off Grid (tranny) has developed a variant of his Gremlin .22 pistol that is mocked up as a Hot Glue Gun. Sounds a little Illegal to me even if it follows the law to the letter
Years ago I wrote a very short post about him in the Tranch Thread (Never Forget the victims of the Alpacacaust)
Very poor quality, but VSK-94 with very rickety folding stock (retained by string), non factory suppessor (tubular object behind the scope) and thermal scope recovered in Chechnya.
Norinco QX-04 slide and barrel, the barrel is fluted in the opposite direction of the rifling and exerts opposite rotational force until the bullet leaves the barrel
BEEEG Box
Bullpup Vepr rifle (not the Ukrainian AK Conversion, but a version of the Russian civilian hunting rifle)
Anti-Russian Hitman Timur Makhauri after being detained by Kiev Police. Wearing what looks like a bullet proof vest with two pistols stuffed into it. Glock and Stetchkin with Gold(?) or Brass(?) Hammer. He would eventually be killed in a car bombing
You can learn more about him in this WSJ article
Experimental AK-107 variant with a rail over the counterweight housing and BUIS
Full size version of the AM-17
Sureshot MK.3 Slim (requires removal of the front sling mount) Chassis somewhere in Africa
Lastly we have a video from the Chronically backlogged AGCast regarding the newish developments in the GunCAD World. Highlights include DIY Buffer springs, Gas Tubes, Gas Blocks and even a new Wildcat Cartridge,
WARNING: Terminal Weebery contained inside
- Joined
- Dec 12, 2022
I fucking called it was a SKS, I knew that gas piston setup a mile away. Also that botch job is hideous. Looks like something you'd see on /k/.
- Joined
- Feb 7, 2023
I knew the loner desert old guy was a tranny before offing himself and AG had anime proclivities, but didn't know he was a troon too.
Speaking of GunCAD. I finally got a P1S and hot fuck is it better than my Ender 3 Pro.
Is the preferred "minimum" filament still PLA+ (which brand these day?) or has everyone gone for CF?
Edit: More than likely mixing up trannies in gunCAD world.
- Joined
- May 6, 2020
He deserves an extra 5 years in prison just for doing that to an SKS.
Akran
kiwifarms.net
- Joined
- Feb 24, 2019
Well I bought the Model 29 yesterday, got 100 rounds of .44mag and .44special. I have never fired either caliber before but I enjoy shooting my 45-70 cyclops so I'm sure I can handle it. I also got a leupold M8 2x for it with the proper mounts. I'll probably find some wood grips as it currently has these aftermarket rubber ones.
- Joined
- May 18, 2020
Usually around Black Friday
G$ and the entire gun industry is hurting at the moment so expect some decent deals this fall/winter.
Sign up for their emails and you're set, or buy via Rooftop Defense or Primary Arms
- Joined
- Feb 9, 2021
Take a closer look, that's a Combat Exchange stock, those are ancient by now. They were renamed to ATI forever ago. There's no telling who bubba'd it. That stock could have been added 30 years and seven owners ago.
The obliterated serial number was a nice touch.
- Joined
- May 6, 2020
Haven't seen one of those before. That stock isn't terrible, it's functional. But everything else about that setup screams mental illness.
- Joined
- Mar 24, 2013
Well I was finally able to order the mounting plate so I can get my Trijicon RCR mounted to my Staccato P. It arrived today, though not before I had to leave for work. So that will be my project when I get home tonight. Can't wait to take it to the range and zero it. Going to take my oldest son with and take a few other guns with. I'll also be taking the FK Brno with to get the RMR mounted to it zeroed as well.
- Joined
- Apr 1, 2022
.38 special has put a lot of dicks in the dirt long before any of us were born, and will continue to do so long after all of us are dead.
But what gun the .38 comes out of is what matters.
What's the make and model?
- Joined
- Apr 1, 2022
Fuckin' neat. I've been looking at mounting options for the Jericho. I don't want it milled, there are a few companies that make, like, a dovetail combo rear iron with either a plate or pic for mounting. I haven't seen many reviews, but I guess if you can get a competent smith to really get that dovetail secure in there and maybe a small tap to run a mounting point, you wouldn't have issues with it going off zero.
https://dovemounts.com/product/dovedot-rmsc/
- Joined
- Feb 20, 2023
Pretty sure I scored my PWS from rooftop so Im on their list.
- Joined
- Mar 24, 2013
Staccato worked with Dawson Precision to come up with a pretty neat mounting solution. The mount is machined into the slide as standard and has a cover with the rear sight mounted to it that is secured by a hex bolt. You just unscrew the bolt and the rear sight and cover come off, then you replace it with the plate that corresponds with the model red dot you wish to mount, which includes a new rear iron sight. There are two hex bolts that attach the plate to the slide, and a third that goes through the rear sight that screws in to where the original hex bolt was. There are also pins on the underside of the plate that slot into two holes on top of the slide and a shallow, wider peg that slots into a shallow groove machined into the top of the slide. It's pretty trick and very secure.
And now that I have the RCR mounted, here are some pics for everyone. I'm very much looking forward to getting it zeroed and running it through it's paces.
Attachments
- Joined
- May 18, 2020
Whoo weee you FANCY
Excellent pickup, now runs that thing like it owes you money and HAVE FUN
- Joined
- Apr 11, 2022
Runs better than the heart of a vaxcattle nigger, that's for sure!Excellent pickup, now runs that thing like it owes you money and HAVE FUN
I've been seeing a sudden wave of hate against Aero Precision, referring to them as a sub-PSA budget brand. I've seen a lot of evidence that their production from 2020-2022 had cratered for whatever reason, with complete builds totally falling apart or malfunctioning right out of the box. I assume this was a result of trying to ramp up production by cutting QC during the panic buying years. Has anyone had negative experiences with Aero? I've used parts from them but never complete uppers.
- Joined
- Oct 6, 2021
Do you want an HK P7, have the cash for an HK P7 but don't want to have to deal with any potential problems that buying a pistol that has been out of serial production for going on 20 years? Well are you in luck because a guy in Texas is making new production P7's including classic and modernized versions
Always wanted a P7 but refuse to buy a pistol you can't attach a light and optic to? Oh boy your dreams have come true
New production Opitcs cut slide
Said to be a Bizon in Uruguay
Belarusian Journo with a PP-93 smg, doing the "MAC Suppressor grip"
Example seized from a criminal gang in Russia
Chechen SF with AEK and Stendo
Agram 2000 with DIY Top folding stock
DTM Machinegun in Syria
I swear someone in this thread (possibly myself) made a post about this thing getting SAAMI Spec'd like a year ago but I can't find and quote it so whatever. Winchester has a new* cartridge, the .21 Sharp, same .22lr case, non heeled bullet with FMJ, plated and solid copper Options. 15-25cpr (assuming it doesn't die on the vine I could see it getting down to 10-20cpr), requires a new barrel. Designed around hunting in states with bans on lead ammunition (will become increasingly common). Slightly higher velocities than stock .22lr
If anything, I think this cartridge has a significantly higher chance of surviving more than a few years due to it using standard .22lr cases. Not only does that mean a huge R&D Cost saving but a huge saving in manufacturing. All they had to shell out for was load development and projectile manufacturing. Will it in say, 50 years replace .22lr, I can't speak to that but it isn't out of the realm of possibility.
*Is it really a new cartridge if you keep the case and change the bullet a little bit?
VKS Vykhlop
Years ago I saw a picture of the baffle stack of this thing and it was so bad, 3 washers and a bunch of rolled up mesh. Someone (Zenitco, Hexagon, Sureshot) ANYONE, needs to buy a chinese DMLS and print up some next gen suppressors for Val/VSS/SR3/9A-91/VSK-94/VKS etc in both Inconel and Titanium, make them smaller, lighter and better performing and posting 4k pics on easily accessible western social media. It would be so kino.
Said to be a Ukrainian Bullpup Conversion from long before the SMO
Also this next one isn't a gun in itself, but
PKM Barrel with GP-25 mount
1911 with glued on "gangsta" sights
"AimLock" Chassis. Essentially you slap an M4 into a Chassis with a bunch of computer actuated servomotors that do micro adjustments to your point of aim by moving the rifle itself while you look through an electro-optical sight. Never really took off
Slightly more sensible model after a bunch of revisions
Popular Mechanics article on the system
Scoped and Suppressed PTRS
Desert Tech vs .338 Lap loaded with pistol powder
Recently there was a video released from Task & Purpose about the supposed glowing reviews of the XM7 from the troops issued it.
Well one of the persons quoted in the article took to the US Army Subreddit to reveal that Task & Purpose cut all of the negative things he had to say about the system entirely and has listed them in his post as well.
Always wanted a P7 but refuse to buy a pistol you can't attach a light and optic to? Oh boy your dreams have come true
The man behind it, you can tell by those dual tubes this isn't some country bumpkin that knows CAD
Said to be a Bizon in Uruguay
Belarusian Journo with a PP-93 smg, doing the "MAC Suppressor grip"
Example seized from a criminal gang in Russia
Chechen SF with AEK and Stendo
Agram 2000 with DIY Top folding stock
DTM Machinegun in Syria
I swear someone in this thread (possibly myself) made a post about this thing getting SAAMI Spec'd like a year ago but I can't find and quote it so whatever. Winchester has a new* cartridge, the .21 Sharp, same .22lr case, non heeled bullet with FMJ, plated and solid copper Options. 15-25cpr (assuming it doesn't die on the vine I could see it getting down to 10-20cpr), requires a new barrel. Designed around hunting in states with bans on lead ammunition (will become increasingly common). Slightly higher velocities than stock .22lr
If anything, I think this cartridge has a significantly higher chance of surviving more than a few years due to it using standard .22lr cases. Not only does that mean a huge R&D Cost saving but a huge saving in manufacturing. All they had to shell out for was load development and projectile manufacturing. Will it in say, 50 years replace .22lr, I can't speak to that but it isn't out of the realm of possibility.
*Is it really a new cartridge if you keep the case and change the bullet a little bit?
VKS Vykhlop
Years ago I saw a picture of the baffle stack of this thing and it was so bad, 3 washers and a bunch of rolled up mesh. Someone (Zenitco, Hexagon, Sureshot) ANYONE, needs to buy a chinese DMLS and print up some next gen suppressors for Val/VSS/SR3/9A-91/VSK-94/VKS etc in both Inconel and Titanium, make them smaller, lighter and better performing and posting 4k pics on easily accessible western social media. It would be so kino.
Said to be a Ukrainian Bullpup Conversion from long before the SMO
Also this next one isn't a gun in itself, but
PKM Barrel with GP-25 mount
1911 with glued on "gangsta" sights
"AimLock" Chassis. Essentially you slap an M4 into a Chassis with a bunch of computer actuated servomotors that do micro adjustments to your point of aim by moving the rifle itself while you look through an electro-optical sight. Never really took off
Slightly more sensible model after a bunch of revisions
Popular Mechanics article on the system
Scoped and Suppressed PTRS
Desert Tech vs .338 Lap loaded with pistol powder
Recently there was a video released from Task & Purpose about the supposed glowing reviews of the XM7 from the troops issued it.
Well one of the persons quoted in the article took to the US Army Subreddit to reveal that Task & Purpose cut all of the negative things he had to say about the system entirely and has listed them in his post as well.