TheRaptorJesus
kiwifarms.net
- Joined
- Mar 14, 2021
Its just a re-badged megapro, so there was no reason it would be "bad". No matter how much work LTT claims to have put into it; most of the work was done by megapro for decades.
Linus Gabriel Sebastian & Linus Media Group / Linus Tech Tips - Narcissistic corporate shill YouTuber driving his media empire into the ground. KILL COUNT: 2
- Thread starter Slav Power
- Start date
-
🐕 I am attempting to get the site runnning as fast as possible. If you are experiencing slow page load times, please report it.
- Joined
- Jun 12, 2020
Yeah, the stuff that's done very well on the screwdriver (the ratchet) is Megapro. The stuff LTT did themselves (the bit holder) ended up a mess.
For $70, a screwdriver should be able to survive falling off of a 6' ladder. Comparing it to matco/snapon/etc. is idiotic because yes those tools are expensive but they can take a damn drop. And if it can't survive jayztwocents dropping it from 6' onto carpet, is it going to survive falling off of a countertop onto concrete? It's not a tool, it's shitty consoomer merch.
TheRaptorJesus
kiwifarms.net
- Joined
- Mar 14, 2021
What I do on my day off? I make my employees work on my house!
I'm only like 4:30 in and it can't be code to pull an extension cord like that.
I'm only like 4:30 in and it can't be code to pull an extension cord like that.
- Joined
- Jan 11, 2024
Linus, you'll have to pry my Sponsor Block from my cold dead hands. Your shitty shills and ad bloated videos are the worst on YouTube, and the reason the project even exists in the first place.
- Joined
- Mar 30, 2020
I've tried an LTT screwdriver, and while it's decent, good lord is it overpriced for what it is. My weapon of choice is this guy from Milwaukee:
In-handle bit storage, easy to switch ratchet, very sturdy and comfy in the hand. Only two things the LTT has over the Milwaukee is the backdrag on the ratchet (it's fairly stiff on the Milwaukee) and the knurled bit on the shaft.
Oh, and the best part?
It's only $20 at Home Depot lmfaoooooo
They also make a Stubby version for $18 get absolutely wrecked Linus
In-handle bit storage, easy to switch ratchet, very sturdy and comfy in the hand. Only two things the LTT has over the Milwaukee is the backdrag on the ratchet (it's fairly stiff on the Milwaukee) and the knurled bit on the shaft.
Oh, and the best part?
It's only $20 at Home Depot lmfaoooooo
They also make a Stubby version for $18 get absolutely wrecked Linus
- Joined
- Jul 4, 2022
No LTT tranny screwdriver is going to compete with quality tools from companies that have decades specialising in it. Someone like Wera or Milwaukee blow the tranny driver away.
- Joined
- Feb 6, 2021
Once again i improre you all to join the 12v driver master race. I can't understand people fucking around with ratchet drivers for PC building purposes. they're total crap since the tension required to activate ratcheting is the same required to fasten the screw and the pitch is so fine and short that the ratcheting will never be used.
Ratcheting screwdrivers are a low iq purchase for PC work.
Bosch PS21 - $, brushed, basic and reliable, cheap to buy in a nice kit with 2 batteries and an impact on sale several times a year
Bosch PS22 - $$, brushless, soft-start, lower power, shorter than ps21, discontinued, but the best one for electronics/computers since it's very gentle, if you can find it
Bosch GSR12v-300hxn - $$, brushless, way more powerful, 1/2 inch shorter so you can actuate the chuck with pinky, needs trigger discipline, loud, but much more useful around the house thanks to extra power
I suppose Milwaukee fuel m12 and 12v Dewalt Atomic are also good but Bosch has the best combo of size, ergos and price.
Ratcheting screwdrivers are a low iq purchase for PC work.
Bosch PS21 - $, brushed, basic and reliable, cheap to buy in a nice kit with 2 batteries and an impact on sale several times a year
Bosch PS22 - $$, brushless, soft-start, lower power, shorter than ps21, discontinued, but the best one for electronics/computers since it's very gentle, if you can find it
Bosch GSR12v-300hxn - $$, brushless, way more powerful, 1/2 inch shorter so you can actuate the chuck with pinky, needs trigger discipline, loud, but much more useful around the house thanks to extra power
I suppose Milwaukee fuel m12 and 12v Dewalt Atomic are also good but Bosch has the best combo of size, ergos and price.
- Joined
- Aug 24, 2023
Dunno why the fuck you would need a powered driver for pc work, nigga I just use my chink shit jewlers set I have with the extendo cock for that. I'm not busting out my wilfuckee tools for pc work.
- Joined
- Feb 6, 2021
aint got time for that shit. this little fucker will save 30% time expecially on disassembly.
Get nice magnetized long-ass bits too and you'll be unstoppable.
Regardless, if you're gonna spend like 80$ after shipping for the Linus Dildo/Driver spend an extra 10-20 and get the fucking bosch driver
- Joined
- Jul 4, 2022
Good luck trying to get that drill driver in tight spaces inside a lot of cases to reach fan screws, unless it's like the Corsair 7000D. Most normal, non soy people also don't need to buy a LTT tranny driver or a Bosch driver, because they will already own at least one suitable screwdriver already.
- Joined
- Aug 12, 2023
2:43 faggot Linus thinks interlacing video information with his screwdriver shilling is a cute way to evade being sponsorblocked. I haven't watched a Linus video since Steve Hiroshima'ed them and 3 minutes in he's more obnoxious than I last saw.
Not sure if he's spoken on it but I bet he uses sponsorblock himself. It's one of the necessary tools to dehomofy youtube and make it useable nowadays.
- Joined
- Nov 14, 2017
I'm not going to watch this; I'm just going to hope they don't make one for Anthony.
TheRaptorJesus
kiwifarms.net
- Joined
- Mar 14, 2021
As someone who doesn't watch the linux channel, has tranthony been in anything recently?
- Joined
- May 26, 2020
What's wrong with using normal screwdrivers? I have a set of Mac Tools screwdrivers in various types and lengths, the long-reach ones are perfect for fitting mainboards in PC cases, and the short stubby screwdrivers perfect for where there is restricted space.
- Joined
- Jul 19, 2020
They don't have the LTT brand on the side, how are you going to show off your favorite youtuber loyalty to your empty living room without a branded product?
- Joined
- Mar 30, 2020
The fuckin thing doesn't even say LTT on it, it's just in their retarded brand colors
TheRaptorJesus
kiwifarms.net
- Joined
- Mar 14, 2021
Ever notice that the gamers nexus screwdriver set is non-ratcheting? There's no need for ratcheting when building a PC.
Included Tools
- Phillips PH1
- Phillips PH0
- Phillips PH00
- Phillips PH000
- Custom Hex Head 5.0mm (ground-down & flattened exterior for capacitor clearance)
- Custom Hex Head 4.0mm (ground-down & flattened exterior for capacitor clearance)
- Allen 1.5mm
- Allen 2.0mm
- Allen 2.5mm
- Torx 6
Only $50 and i'd have to say more useful for PC work. With a 7 year warranty, not a trust me bro warranty.
- Joined
- Jan 2, 2022
This guy who hosts the Mac Address channel for LMG gives me huge gay sex pest vibes
Just trying to learn about apple and he's got the vocal equivalent of rape. I'd rather put up with Tranthony
Just trying to learn about apple and he's got the vocal equivalent of rape. I'd rather put up with Tranthony