Mega Rad Gun Thread

ellroy said:
I was talking about the thread here in self-sufficiency. I’m not surprised ARFCOM is doing that. I tried creating an account a few weeks ago and got my account immediately banned while it was being verified for reasons of using a VPN or Tor.

Fuck that place.
Click to expand...

It’s a hug box for some of the most miserable boomers on the planet.

Romulus augustulus said:
They banned me for saying ok boomer. The b-word really gets their panties in a twist.
Click to expand...

I got banned for criticizing Israel.
 
Soviets knew even back in the 1970s that diopter sights were better, yet it took 50 years more to put them on the AK
HBGfK8iWcAA5Zaj.jpgHBGgIQVacAAibRR.jpg
First image is from a test report, 2nd is commentary by Dragunov who was developing the SVD during the same time period
 
Romulus augustulus said:
I'm very tempted to make a very bad financial decision. I won't, but that little voice at the back of my head.....
View attachment 8560672
Click to expand...
Live your fancy gentlemen dreams. I don't have that kind of coin so my modest O/U isn't a flex on the boomers at the club. The flex is buying 1lb of Red Dot and Green Dot powders at a time instead of penny pinching some bulk 700x I got in 1983 off the back of a truck. "Look at mister money bags here shooting loads with components from this decade, you gonna keep those hulls?"
 
Akran said:
View attachment 8556288
"Oh my god a knife revolver! I can finally own something like the apache"
View attachment 8556295

View attachment 8556302
Click to expand...
I didn't know these were in production again. Neat. Least ergonomic albeit highest capacity of all Knife guns. QSB-11, QSB-91 and NRS-2 out rank it in ergonomics respectively. Interesting that they've branched it into .25 ACP

QSB-91
1771096343662.jpeg
1771096697922.jpeg

QSB-11 is a modernized variant in 5.8x24 and I believe with a different trigger mechanism
1771096781186.jpeg


ATF numbers for Form 1 though 5 as of the 10th
1771092340288.jpeg

Nopel Gigapistol (the circular frame is the magazine)



Upcoming Super Safe FCG for RPD's
1771092882301.jpeg

I*raeli M89SR M14 Bullpup conversion
1771094722419.jpeg
1771094790461.jpeg

Vietnamese Cornershot with TT-33
1771094876033.jpeg


Bullpup AK-12


Venezuelan Vektor CR-21
1771095346847.jpeg

Custom MAS-36 from Syria
1771095542215.jpeg

1771095585343.jpeg

Australian SWAT with meme lowers
1771095635452.jpeg

Strategic Sciences



1771095960808.jpeg

Mysterious Chinese integrally suppressed smg
1771096192375.jpeg

Brazilian DIY PCC/SMG in an airsoft SCAR shell
1771096984780.jpeg

Issue #18 of the Guncad Digest

God's drunkest driver said:
want the most silent setup possible nightstand gun use badly, something with expensive captive piston ammo would be pretty cool for that.
Click to expand...
Technically speaking, there is nothing preventing someone from building a Captive Piston PCC the size of or smaller than an MP5SD with an FRT. The only hurdle is building it, making the ammo and filing out hundreds and thousands of Form 1's

xf7ub2LMGZj%yV said:

Caylee Can update. Wish we could place bets on when suppressors are actually going to come out lol. I think a lot of people for 200$ are just going to print their own? FTN:5.1 22s work pretty well, I'm waiting on my stamp to say for sure though. Don't know how much of a market these will have unless they work on 5.7 or something or other pissin hot 22s.
Click to expand...
Who will bring a product to market first? an onlyfans tranny or a latinx methhead? Troonshine vs Crystal

I wonder since Dead Air is doing DMLS now if they're going to do a next gen Wolverine since Zastava is kicking their ass in the PBS-1 look alike department.
 
I keep getting a lot of firearms seizure posts from the shithole states (California and New York)
How many bodies does this ww1 condition looking Glock have?
IMG_5564.jpeg
 
Foley said:
Soviets knew even back in the 1970s that diopter sights were better, yet it took 50 years more to put them on the AK
View attachment 8560619View attachment 8560621
First image is from a test report, 2nd is commentary by Dragunov who was developing the SVD during the same time period
Click to expand...
It's an old picture, because I've had these sights for years.
20150609_201635.jpg

The Rear sight is part of the recoil assembly, and locks into the rear tang, it uses a "standardish" dust cover, which as you can see, mostly fits my Saiga well enough.

 
Last edited:
I think I've posted my Lima6 here before, Had to send the barrel to redrill/dimple (rifle length gas needs to be EXACT*, where as other gas lengths have wiggle room, turns out doing this with a handrill and a 3d printed jig is a little inaccurate ).
Didn't pick up a Lima6 barrel when those were in stock at KAK...
the barrel I sent out has gotten lost on the way there and back with the USPS.
It's been weeks guys, I'm loosing it, I just want to get it working.

h2di-cat-dead.gif

*I also have a sneaking suspicion that even with it drilled out by them there might not be enough gas. It was only cycling about halfway back, not enough to strip a cartridge. So I probably need another barrel anyway!
/rant
 
I don't have access to a lathe and I have to fight impatience while I work on a Smith & Wesson barrel setback by hand

Kill me now
 
xf7ub2LMGZj%yV said:
I think I've posted my Lima6 here before, Had to send the barrel to redrill/dimple (rifle length gas needs to be EXACT*, where as other gas lengths have wiggle room, turns out doing this with a handrill and a 3d printed jig is a little inaccurate ).
Didn't pick up a Lima6 barrel when those were in stock at KAK...
the barrel I sent out has gotten lost on the way there and back with the USPS.
It's been weeks guys, I'm loosing it, I just want to get it working.

View attachment 8561965

*I also have a sneaking suspicion that even with it drilled out by them there might not be enough gas. It was only cycling about halfway back, not enough to strip a cartridge. So I probably need another barrel anyway!
/rant
Click to expand...
Terrible, I don't know why but every gun part I've ever lost has been through USPS. Its probably the niggers, though I don't know what they'd do with a PPS43 bolt (or in your case barrel).
I am eagerly awaiting for the batch 2 shipping announcement, I bought a buffer kit from them but need to install it on a lower. I was hoping Hoffman would release his by now so I could print but I haven't seen it in the wild so I'll probably rob one of my other builds for the time being.
 
You must log in or register to reply here.
Back
Top Bottom