General GunTuber thread

[White Devil]

I could've swore this thread was about guntubers and not whose boiled bean water tastes better.

We need these derails every so often. Gets the bad blood out.

 

[TerminalTryHard]

Hey, you don't get to say anything about our dirty bean water. You suggested Bang of all things

Yes, Bang. The objectively best energy drink.

 

[UVB-76]

Might as well sperg about 3d printing since there's a lul in the guntuber talk. One of the biggest advantages of 3d printing that most people don't consider is how it can be used in conjunction with other tools/processes.

Instead of having huge blocks of steel milled and precision ground to make v-blocks, this machinist prints what are essentially stands for carbide rods, which allows him to combine a cheap material to serve as structure and get the precision from something he can order online.
There's a lot of focus on 3d printing a final product, but just as important is how 3d printing can make the tools that assist a final product, which could still be made out of metal.

 

[Sleazy Car Salesman]

Yes, Bang. The objectively best energy drink.

Bang? Is that some new flavor of Four Loco? Because Four Loco is the best energy drink.

 

[Puff]

Might as well sperg about 3d printing since there's a lul in the guntuber talk. One of the biggest advantages of 3d printing that most people don't consider is how it can be used in conjunction with other tools/processes.

Instead of having huge blocks of steel milled and precision ground to make v-blocks, this machinist prints what are essentially stands for carbide rods, which allows him to combine a cheap material to serve as structure and get the precision from something he can order online.
There's a lot of focus on 3d printing a final product, but just as important is how 3d printing can make the tools that assist a final product, which could still be made out of metal.

Printed 80% lower jigs are a thing, which is roughly this idea.

 

[Baked Al-Aqsa]

Is the coffee even any good?

All coffee is shit. It's just a matter of how much easier it is to gulp down, how much caffeine it gives you, and how less unpleasant it is. Anybody who tells you otherwise is a coping fag who is trying to justify why they spend the equivalent of a used Camry every year on their socially acceptable substance abuse. The only more insufferable people in this regard are tobacco faggots.
T. Drinks 3 cups of coffee a day minimum.

Yes, Bang. The objectively best energy drink.

Bang? Is that some new flavor of Four Loco? Because Four Loco is the best energy drink.

Energy drinks are for teenagers and Slaviggers.

But the best way to hurt the Man is too have as many kids on welfare as possible. It's not the glamorous way to do it, but you'll hurt America way more than killing cops.

THIS.

 

[Dvsilverwing]

Bang? Is that some new flavor of Four Loco? Because Four Loco is the best energy drink.

They took the caffeine out of Four Loko a long time ago I'm pretty sure

 

[Puff]

All coffee is shit. It's just a matter of how much easier it is to gulp down, how much caffeine it gives you, and how less unpleasant it is. Anybody who tells you otherwise is a coping fag who is trying to justify why they spend the equivalent of a used Camry every year on their socially acceptable substance abuse. The only more insufferable people in this regard are tobacco faggots.
T. Drinks 3 cups of coffee a day minimum.


Energy drinks are for teenagers and Slaviggers.

THIS.

To get back on topic, Brandon Herrera recommends cocaine if you're over 700mg of caffeine a day. On Rekieta's stream.

 

[Corn Flakes]

All coffee is shit. It's just a matter of how much easier it is to gulp down, how much caffeine it gives you, and how less unpleasant it is. Anybody who tells you otherwise is a coping fag who is trying to justify why they spend the equivalent of a used Camry every year on their socially acceptable substance abuse.

Be as it may, I'd rather feed my addiction with something that doesn't taste like that used Camry's burnt-out engine oil. So having decent coffee in the house is nice.

To get back on topic, Brandon Herrera recommends cocaine if you're over 700mg of caffeine a day. On Rekieta's stream.

That's what? Only 7 cups a day? Fucking wimp.

 

[DocAwe]

BRCC always came off like they were trying too hard and just felt fake and gay.

 

[Sleazy Car Salesman]

They took the caffeine out of Four Loko a long time ago I'm pretty sure

Yeah... but the dream, and the lack of memories from the blackouts, are still there.

 

[Dvsilverwing]

Yeah... but the dream, and the lack of memories from the blackouts, are still there.

Fair enough. I still see it around everywhere, I've meant to try the Gold flavor for awhile because everyone said it tastes like Red Bull, but there's always generally just something else I'd rather get when I'm thinking on it.

 

[1Tonka_Truck]

They took the caffeine out of Four Loko a long time ago I'm pretty sure

One of my friends bought one of the last pallets of original recipe Four Loko sold in my state. I hauled from the distributor to his house on the bed of my work truck.


I have weird friends.

 

[Kendall Motor Oil]

But the best way to hurt the Man is too have as many kids on welfare as possible. It's not the glamorous way to do it, but you'll hurt America way more than killing cops.

https://en.m.wikipedia.org/wiki/Cloward–Piven_strategy

 

[HumptiDouji]

 

[Smoke Manmuscle]

One of my friends bought one of the last pallets of original recipe Four Loko sold in my state. I hauled from the distributor to his house on the bed of my work truck.


I have awesome friends.

FTFY

 

[Kendall Motor Oil]

View attachment 3269959

Sounds like /r9k/.

 

[HelpingNoone]

Instead of having huge blocks of steel milled and precision ground to make v-blocks, this machinist prints what are essentially stands for carbide rods, which allows him to combine a cheap material to serve as structure and get the precision from something he can order online.
There's a lot of focus on 3d printing a final product, but just as important is how 3d printing can make the tools that assist a final product, which could still be made out of metal.

I was just watching that same channel today.

Really interesting concept using the dowel pins and 3d prints.
I can think of a number of of different applications other than v blocks. And if you built in some adjustment screws you could dial the pins in to any dimension with the right metrology tools.

I only have a lathe at home but do some light milling on it. A simple 3d print fixture like this saves hours trying to get 5 evenly spaced spanner slot cut in a suppressor mount with no rotary table.

 

[Kendall Motor Oil]

This G3 alignment jig is another use.

https://www.thingiverse.com/thing:5170099

 

[Corn Flakes]

I was just watching that same channel today.

Really interesting concept using the dowel pins and 3d prints.
I can think of a number of of different applications other than v blocks. And if you built in some adjustment screws you could dial the pins in to any dimension with the right metrology tools.

I only have a lathe at home but do some light milling on it. A simple 3d print fixture like this saves hours trying to get 5 evenly spaced spanner slot cut in a suppressor mount with no rotary table.

View attachment 3270186

Well, this is interesting. What kind of dimensional tolerances do you get with those 3D printed parts? Or would you print them and then grind/mill them to size since the plastic is so soft?