Mega Rad Gun Thread

  • Want to keep track of this thread?
    Accounts can bookmark posts, watch threads for updates, and jump back to where you stopped reading.
    Create account
gunschizo.jpg
 
NOT a Loaded Gun said:
WHAT. WHERE IS TRIGGER.
Click to expand...

it appears to be missing in this picture, but in those kits the trigger goes in the forward pistol grip, and the transfer bar runs through the gap between the bottom of the receiver and front trunnion. From there the bar goes to what is basically a modified AK trigger with no actual trigger outside the gun. they tend to be as janky as you'd expect, from what I've seen
 

Attachments

  • bullshitpup.jpg
    bullshitpup.jpg
    204.7 KB · Views: 42
Panama said:
Football pads, chaps, crossbow. Got to let the boys breathe.

On an unrelated note, I’ve got a retarded project I’m starting soon.
Someone in Cali made this a few years ago, and according to the ATF, this abomination still a pistol.View attachment 3506914
Well, one of my buddies wanted my mossberg shockwave, and offered something up as a trade:
View attachment 3506933
Normally a Draco has around a 10.5 inch barrel, whereas the micro is only 6.5. OAL is only 14.5 inches, and to provide clearance for the magazine, the trigger guard will be almost at the muzzle.
Looking forward to my terrible combloc bushmaster armpistol, and accidentally blowing off my fingers.
Click to expand...
I think... I think i'm dying inside.
Then again I have an RDB so maybe i's just gas.
 
(‿ˠ‿) said:
it appears to be missing in this picture, but in those kits the trigger goes in the forward pistol grip, and the transfer bar runs through the gap between the bottom of the receiver and front trunnion. From there the bar goes to what is basically a modified AK trigger with no actual trigger outside the gun. they tend to be as janky as you'd expect, from what I've seen
Click to expand...
Yup. The originals used a small gauge mild steel wire as a linkage rod that would flex when actuated, and due to the proximity of the trigger axis pin to the barrel, the trigger could get hot enough to burn you. Complete garbage.
So far what I’ve thrown together is closer to a sliding trigger bow in the vein of a 1911 or steyr aug, instead of a linkage. It’s directly interfacing with the original trigger surface instead of the sear hook, so I’ve got a little more mechanical advantage to counteract the added friction. Mine’s also garbage, but it’s a micro draco. Turning a sow’s ear into a polished turd.
 
Last edited:
Smoke Manmuscle said:
Any suggestions on carry pistols for self defense while in back country? Looking for something to carry while hunting. Also welcome recommendation for holsters and ammo.
Click to expand...
A .357 Mag revolver, a 15 round or more 9mm, a smaller .22lr revolver, maybe a takedown rifle.
 
likeacrackado said:
Very impressed with Cornfed Eli. Shot a less than full size(about the same as the twink shooter), stationary target at 25 yards with my CC and didnt do any better than he did under those stressful conditions at almost twice the range.
Click to expand...
I'm curious if he had a RDS on his Glock or not..? Either way he's a pretty good shot. Hopefully he doesn't run into any legal issues with the mall being a gun free zone.
 
Falcos_Commisar said:
Thought I might share some pics, swapped my Aero 12 inch ATLAS ONE-S for a BCM MCMR 13 inch and fixed Aero's flash hider washer clusterfuck with the correct crush washer install for the flash hider
Click to expand...
What made you swap out the Atlas? They've been my handguard of choice for my last few builds, mostly because of the slim profile/light weight and the super simple mounting system.
 
You must log in or register to reply here.
Back
Top Bottom