Mega Rad Gun Thread

  • Want to keep track of this thread?
    Accounts can bookmark posts, watch threads for updates, and jump back to where you stopped reading.
    Create account
The МЦ-255 revolving shotgun
I need it in every configuration.
MC255.jpg
MC255-4.jpg
MC255-5.jpg
 
WhatInTheActualFuck said:
Ordered a bunch of ancillary shit for the Howa/Hera rifle. 20MOA rail, bipod, goofy MDT bolt knob thing, rings, mags, Griffin taper mount muzzle device, etc. Looking forward to putting it together.

Also, I'm really feeling that this rifle needs a rattlecan paint job.
Click to expand...
Seems like a fun project. Bolt actions are project guns in general, always looking for the next muzzle brake (want a new one for my 300 win mag lol) or scope, and fun shit like ammo holders on the stock. Remind me to take a picture of my Franchi Momentum sometime, we'll compare notes
 
Modified Ukrainian Maxim
Screenshot_20230802-133321.png

Embellished Russian PK
Screenshot_20230802-021141.png

FGC-9s captured by the Myanmar army, the number of which somehow increases every time:
Screenshot_20230802-120128.png
 
Something new & something old:

Type 89C
Screenshot_20230803-130240.png
I don't know why these tickle me in just the right way, but it do; especially if one could be had in 7.62x25 (or something similar).

Based JE1 ("Japeradicator"), long-recoil machinepistol/early PDW in .30 carbine.
Screenshot_20230802-021737.png
 This one also makes me want, given the weird form-factor, operation & caliber. I like to imagine it with a strap/sling/harness & some sort of aiming device or red dot, but mostly letting it rip from the hip.
 
WhatInTheActualFuck said:
Ordered a bunch of ancillary shit for the Howa/Hera rifle. 20MOA rail, bipod, goofy MDT bolt knob thing, rings, mags, Griffin taper mount muzzle device, etc. Looking forward to putting it together.

Also, I'm really feeling that this rifle needs a rattlecan paint job.
Click to expand...
I ended up getting the 24" heavy barrel variant. Similar setup, 20MOA rail and everything, but a different muzzle device.

Did your chassis come with a Hera Arms mag? My mag was utterly shit, did not even fit in the rifle out of the box, while MDT and Magpul mags worked flawlessly.
 
Badungus Kabungus said:
I ended up getting the 24" heavy barrel variant. Similar setup, 20MOA rail and everything, but a different muzzle device.

Did your chassis come with a Hera Arms mag? My mag was utterly shit, did not even fit in the rifle out of the box, while MDT and Magpul mags worked flawlessly.
Click to expand...
Unfortunately, I haven't received either the chassis or the action yet - they're both scheduled to arrive tomorrow. Sucks about the magazine, but fortunately I already have a couple of Magpul mags laying around.
 
WhatInTheActualFuck said:
Unfortunately, I haven't received either the chassis or the action yet - they're both scheduled to arrive tomorrow. Sucks about the magazine, but fortunately I already have a couple of Magpul mags laying around.
Click to expand...
Good luck. One thing I noticed on mine is that the side screws (not the main action screws but the three screws on each side) on the chassis had different torque values, had to retorque them, few on one side were looser than on the other side. Other than that, no issues.

Magpul mags are good but I really like the MDT metal mags, very well built. Also they're dual stack so they're shorter than the Magpul mags while still holding 10 rounds.
 
The RMB-93 shotgun, cousin of the gm-93 grenade launcher. It's a reverse pump action where you push the barrel forward off the breach block to eject a case and then you pull it back over a live shell. It's basically an M203 with a magazine on top.
rmb-93_2.jpg
rmb-93.jpg
 
Badungus Kabungus said:
Good luck. One thing I noticed on mine is that the side screws (not the main action screws but the three screws on each side) on the chassis had different torque values, had to retorque them, few on one side were looser than on the other side. Other than that, no issues.

Magpul mags are good but I really like the MDT metal mags, very well built. Also they're dual stack so they're shorter than the Magpul mags while still holding 10 rounds.
Click to expand...
So I've received the chassis, but there's a delay from the shipper on the action (sigh).

My H7 came with two magazines, and while they do fit, nobody at Hera has seemingly heard about the benefits of beveling magazine wells or even bothering to break the edges of both the mags and the magwell where they'll come into contact. If you insert it at the exact "German-precision" 90° angle, it slides in just fine. I'm probably going to lightly file bevels into both the magwell and the magazines (specifically the front and rear of them) so it isn't so fiddly.
 
WhatInTheActualFuck said:
So I've received the chassis, but there's a delay from the shipper on the action (sigh).

My H7 came with two magazines, and while they do fit, nobody at Hera has seemingly heard about the benefits of beveling magazine wells or even bothering to break the edges of both the mags and the magwell where they'll come into contact. If you insert it at the exact "German-precision" 90° angle, it slides in just fine. I'm probably going to lightly file both the magwell and the magazines so it isn't so fiddly.
Click to expand...
Yep, I had to file my magazine as well to have it fit. So much for German quality. Everything else is solid though, so can't really complain.

Get some of those MDT all metal mags. Worth the money.
 
GeorgeHWBush said:
View attachment 5244318

Source
Click to expand...
Masshole PD = incompetent retards. Show me this replicated consistently in a lab setting and I'll bite. Glock had the EXACT same "issue" 30 years ago. There are hundreds of thousands if not millions of P320s on Earth. If they were Taurus tier shake me and I shoot trash they'd have killed multiple people by now.




WelperHelper99 said:
That maxim has been absolutely gutted, yet I don't completely mind, it looks sick with the heat shroud. Also nice to see the uprising in Myanmar is going well. Now they just need to 3d print some revolvers for the meme. Also the PK is Kawaii lol
Click to expand...
The PK is excellent. As for Myanmar..... The rebels are not having a great time when the Army shows up in force or the airplanes and helicopters find them. Anyway, Myanmar has been in a low level civil war for decades at this point.
 
Falcos_Commisar said:
Masshole PD = incompetent retards. Show me this replicated consistently in a lab setting and I'll bite. Glock had the EXACT same "issue" 30 years ago. There are hundreds of thousands if not millions of P320s on Earth. If they were Taurus tier shake me and I shoot trash they'd have killed multiple people by now.
Click to expand...
It was apparently a holster issue and Safariland issued a warning about the 7000 series in 2021.
 
I'm in the process of building a dedicated 22LR (my first .22, believe it or not). What's some ammo to be on the lookout for?

I've always hear CCI MiniMags are good. Anything else?
 
You must log in or register to reply here.
Back
Top Bottom