Mega Rad Gun Thread

[BananaHand]

Asked elsewhere, but figured why not here too.

Building out my M249S case, and looking for ideas, thinking;

3 Box Mags
2 Rows of Magazines stacked 3 deep
1 Extra Barrel
1 Optic
1 Tool Kit (headspace timer, etc)

View attachment 7044247

Maybe get a FLC for it in the Squad Automatic Rifleman configuration, also some 50 round sack cloth drums.

 

[HelpingNoone]

neat! as far as i can tell the skoprints lower can be ordered with everything needed installed so that all i have to do is swap lowers. would this be the case with the leber?

Yeah I'm sure multiple people will be selling kits once it's finished it's beta testing.
Skoprints didn't create that housing; it's just someones FOSS (Free and Open Source) design that he prints and sells parts for. I wouldn't be surprised if Sko starts selling the Leber V2 as well.

I know it takes a few hundred dollars to get set up a SS on an MP5 so figured it might be worth the wait for something that should be significantly better.

 

[The Dude]

Alright another fun questions for kiwis whats your favorite AR-alternative? I recently decided to drop some cash on a new mini 14 and excited to pimp it out sucks the stainless models run an extra 200 more from an already steep price tag any bullpup fans?

Steyr AUG A3. Though, if I had to do it over again I'd probably go with the X95 Tavor since it's less of a pain to suppress and takes regular ol' AR mags. When I bought my AUG A3 the X95 had yet to make it to the US civilian market and only the standard Tavor was available, and I never liked the "trigger" style mag release on it. Always seemed like it had a good chance of getting snagged on your web gear and dropping the mag.

 

[Burekbossman]

Steyr AUG A3. Though, if I had to do it over again I'd probably go with the X95 Tavor since it's less of a pain to suppress and takes regular ol' AR mags. When I bought my AUG A3 the X95 had yet to make it to the US civilian market and only the standard Tavor was available, and I never liked the "trigger" style mag release on it. Always seemed like it had a good chance of getting snagged on your web gear and dropping the mag.

Agreed, I've enjoyed my X95. The front sight is a little chunky, but if you're gonna drop about 2k on a rifle you're gonna get a scope/red dot.

 

[Fear&LoathinginMcDonalds]

It has begun.
Only need the pump for my ECM setup.
Soon.

 

[Club Sandwich]

View attachment 7051986
It has begun.
Only need the pump for my ECM setup.
Soon.

there's something very giger-esque about the photo.

 

[Physical Therapist]

I've got a dumb question about Sig P320 models. The P320 X Full is listed as weighing 29.6oz. A P320 X5 with polymer grip module is listed at 35.6oz. Does the 0.3 inches of barrel and the magwell really add that much weight? It's a seemingly pointless middle ground between the standard P320 and the Legion.

 

[WhoBusTank69]

I've got a dumb question about Sig P320 models. The P320 X Full is listed as weighing 29.6oz. A P320 X5 with polymer grip module is listed at 35.6oz. Does the 0.3 inches of barrel and the magwell really add that much weight? It's a seemingly pointless middle ground between the standard P320 and the Legion.

 

[Physical Therapist]

View attachment 7052549

50 bucks for a 1.6oz weight. Classic (((Sig)))

 

[Blasterisk]

50 bucks for a 1.6oz weight. Classic (((Sig)))
View attachment 7052572

Duct tape and somebody else's roofing hammer is a lot cheaper, but since this weight can't shoot you in the leg it's still one of Sig's better products.

 

[Apis Mellifica]

Alright another fun questions for kiwis whats your favorite AR-alternative? I recently decided to drop some cash on a new mini 14 and excited to pimp it out sucks the stainless models run an extra 200 more from an already steep price tag any bullpup fans?

I love bullpuppers. As far as a Mini 14 goes, look into retorquing the gas block screws and installing a smaller diameter gas bushing to tame the action. Mini's come disgustingly over gassed for no good fucking reason, retorquing the gas block to (if I remember correctly) 35 ftlbs helps accuracy. The trigger is fine out of the box but the rear sight is dogshit. For as much as the base rifle costs expect to sink another $200 or so to make it shootable to a modern standard. No idea why Ruger continues to fuck up what should be a fun tiny M1 Garand. Also the Muzzlelite bullpup kits fucking suck, buy one for the meme but don't pretend it will be anything more.

 

[74164978231]

How do you have the M249s but also have a fin grip

You could buy semi auto M249s directly from FN up until a year or two ago. Cost $8000-10000 iirc.

Looks like they still sell them?

https://fnamerica.com/products/rifles/fn-m249s/

View attachment 7051986
It has begun.
Only need the pump for my ECM setup.
Soon.

Pro tip, print the frame upside down. Only supports that will be needed are for the trigger guard so much faster print times.

 

[Kromeleon]

Doesn’t that put the axis of highest stress in plane with the layer lines?

 

[Romulus augustulus]

You could buy semi auto M249s directly from FN up until a year or two ago. Cost $8000-10000 iirc.

not a bad price considering that they probably don't sell more than a dozen per year.

 

[Good Goyim]

Bubba is proud.

 

[Yours Truly 2095]

The ultimate hipster rifle just dropped

 

[Good Goyim]

 

[DocAwe]

Should have got SP2022s instead.
Or just basic bitch Glorks.

 

[WhoBusTank69]

View attachment 7054864

Per Grok,

Absolute fucking retards out here not researching their carry guns firsthand.

But you know, I wonder if the P250 will fit in the Flux Raider chassis.

 

[Yours Truly 2095]

Instead of buying retardedly expensive pre cut idpa or ipsc targets just get a stencil and reuse big Amazon boxes