Mega Rad Gun Thread

would be even better bump in the night gun or trench coat carry esp since I work in Philly so I need to return fire against Temu Glock Switch havers.
I can only imagine the "shiiiiiiiiiet" you'd get when you put 5 rounds into one of them damn quick while they spray an entire magazine at you and don't hit a thing.
OTs-35 pistol. Makarov designed for use with super hot loaded 9x18 (muzzle velocity jumped from 1030fps to nearly 1400fps with presumably the same or.similar bullet weight) Compensator is 18mm long
I bet that thing is fucking loud
 
  • Like
Reactions: Buttigieg2020
1761057651635.png
Daily Reminder
 
Create a generic website with leftist slogan patches and shirts: https://www.johnbrownprints.com/collections/all
It's also a great way to get antifag name + address combos, and get paid to do it too! Every chud should be doing this. Literally just setup a Shopify or print on demand t-shirt store and pay some jeet off of Fiverr to make something with a generic slogan.

There may even be a few already out there that are not run by who you think ;)
 

View attachment 8058187
News on: Glock being gay as fuck.

Glock is really fucking gay if this is true. Also I can't believe their naming convention got WORSE, what the hell.

You can't even say this is for california because only Gen 3s are on the roster? also "all will be NON-MOS"? What's the point.
If you told me my Glock would be discontinued I'd have laughed because there's no way they would discontinue it. Yet here we are...
 
AR15/10 platforms are the perfected platforms for assault and battle rifles. Eugene Stoner is an OG.
They are. You can even put a self contained short stroke upper in an AR lower (MCX or BRN-180).
View attachment 8058187
News on: Glock being gay as fuck.

Glock is really fucking gay if this is true. Also I can't believe their naming convention got WORSE, what the hell.

You can't even say this is for california because only Gen 3s are on the roster? also "all will be NON-MOS"? What's the point.
Lol, Glock got buck broken by California
if that's the case it just might be the year of the RXM. it's up to magpul to stop kicking their footy pajamas around and release the other size grips as well as a larger variety of aftermarket grips/pdw kits.
Someday.... I hope
Agreed, especially considering how fucking easy it would be to make whatever modified nuGlock full auto again, pistols are always very easy to convert if you're not a complete retard.
Lol you can use a small file.... Buuuttt the average demo that uses switches and stendos are really REALLY stupid
It was part of my old collection, which I mostly no longer have. Those were all the guns I got as gifts growing up, bought in my early adult life, or inherited from my grampa and dad when they passed. Unfortunately, my dad passing away put me in a deep depression that caused me to be unemployed for three years. To make ends meet, I ended up having to sell off much of my old collection. I still have my dad's deer rifle, hunting shotgun, a beat-up Super Blackhawk that I plan on getting restored and customized one day, and my mom has my dad's old Colt .22lr revolver that I'll get one day along with a Krag that was my other grampa's deer rifle.

I liked the XCR a lot. It was a smooth shooter, never failed on me, and I had even had it two-toned Duracoted it tan and black (this was before Cerakote had either come out, or became widely known in the firearms hobby) with a black skull stencil on each side. But it's not one of the guns I regret selling most. Those would be my Winchester 94s, vintage S&W N Frames, and a Colt New Service that had a long family history. I'd give anything to have those back.
Bro, that's painful 😣

If the JAKL 2.0 is bad, I'll probably go for a XCR-L mid length handguard. Heard nothing but good about them.
6P41M (Improved PKP with changeable barrel)
1760980166172.jpeg
Alright everyone, Russia just made the best gpmg ever, hang it up.
 
The best gpmg of all time would have been a belt fed bren in 7.62 NATO.
Or if you want something that actually exists the MG3
 
Century sp5 clones
anecdotally you sometimes need to replace Turkish extractors and springs with HK ones but then they work fine after that.
IIRC s3igu2 (leber dev) prefers the PTR as the best clone option (source)
It seems MAC is the brand you really should avoid, an AP5 should work though.
I guess this is also mostly if you want it to run a SS.
Full transparency an MP5 is on my list but I don't have one yet.


"Now that Gaston is gone, I hope we see more innovation out of Glock!"
~The finger of the monkeys paw slowly curls closed~
 
  • Winner
Reactions: Falcos_Commisar
Was it this clip?

You missed it? KF Post here
Yes it was GlockStore reporting on all current guns being pulled from production.

Glad I already have all the Glock models I currently want because that sounds like dogshit. They're "not represented to speak for you" yet they confirmed that the models you'd want to have MOS for won't have them. Good thing there's a ton of aftermarket support so I can keep what I currently have running.
First wave has one dealer-specific MOS release, Lenny reported that the wider MOS release will be a lot later. Which is bullshit.
I also don't have any confidence whatsoever in their little assurance at the bottom, "Externally" however it looks doesn't matter to me, I don't know what they're changing internally that I would have to worry about being fucked up.
 
The best gpmg of all time would have been a belt fed bren in 7.62 NATO.
Or if you want something that actually exists the MG3
I've never used any of the belt fed guns but I've heard nothing but good things about the PK guns (sans their ability to take optics until the PKP) the biggest positive being the weight being super light while it still manages to have controllable recoil. Apparently it's absurdly reliable, although my source is just "I knew a guy" or two who used one for their jobs and they said it was a good gun and other fun anecdotes. I've never heard bad things about the MG3 either mind you but I can see that it's a heavy gun. I'm sure it's pretty much the GPMG of choice globally for a good reason.

Also missed it by a second but yes that appears to be a FAMAS Felin, I actually was on Moka's site a few days back and IIRC he was taking preorders for the parts kit(s).I guess he just had the one and it's sold already lol.
 
  • Like
Reactions: Falcos_Commisar
You missed it? KF Post here
Yes it was GlockStore reporting on all current guns being pulled from production.


First wave has one dealer-specific MOS release, Lenny reported that the wider MOS release will be a lot later. Which is bullshit.
I also don't have any confidence whatsoever in their little assurance at the bottom, "Externally" however it looks doesn't matter to me, I don't know what they're changing internally that I would have to worry about being fucked up.
It doesn’t confirm or deny the availability of current production models in that email…
 
  • Optimistic
Reactions: Fount of BadSpeak
Glock put out an email in response to their shitfest being leaked early
View attachment 8062516
Not ideal!
Well, that confirms that Glock is fucking over its customers because the government refuses to deal with niggers illegally modifying their illegally obtained handgun so that they can illegally kill people. Why even bother coming out with a "response" when it effectively just confirms all of the rumors? Also "externally these pistols remain the same trusted look and performance that you trust" doesn't inspire confidence... it's not the look of Glocks that made them popular. They're ugly as fuck guns. It's the interior performance that made them popular. What are you fucking up with the internal performance to appease anti gun, brown loving cunts that hate all of us? That's the important part that we need to know.
 
Back
Top Bottom