Mega Rad Gun Thread

888Flux said:
It's also a great way to get antifag name + address combos, and get paid to do it too! Every chud should be doing this. Literally just setup a Shopify or print on demand t-shirt store and pay some jeet off of Fiverr to make something with a generic slogan.

There may even be a few already out there that are not run by who you think ;)
Click to expand...

Some based Aussie did that with BLM and made hundreds of thousands.
 
  • Like
Reactions: Dean Pentel and Falcos_Commisar
Sneeds said:
Yeah I’ve been thinking of saving up for an older Uzi or something else.

Are the Zenith and Century sp5 clones any good?
Click to expand...
I have a Zenith, Century/MKE, and HK.

Don't get a Zenith. Long story but I eventually got a full refund. Not worth the extra money & I suspect the infamous Todd Bailey has his hands in some part of it.
Screenshot 2025-10-22 at 8.30.36 AM.png

With the MKE, plan to get an HK Ejector ($37 $44) & some HK extractor springs ($7 $11). Guns are generally run great. Just be ok with the lottery where you may get slightly canted sights/optic trunnion tab, little more wobbly than normal magazines (their mag catch cuts are often dremel'd garbage).
Clean them well because they are often filled with sand from the factory.

I fell in love with roller delayed 9mm because of the MKE. With all the other expensive shit I put on it the extra $1500 for a real HK wasn't a big deal.

Edit: Updated w/ Zenith proof. Updated prices on parts (keep rising each year)
 
Last edited:
  • Winner
  • Like
  • Informative
Reactions: Dean Pentel, DunmerisTopBrass, WhoBusTank69 and 2 others
i fount a cool photograph:
a girl and her tiger. 1860s india..jpg

A woman poses with the tiger she shot. India, circa 1860s.

The gun she has is a smooth bore SxS fired with ball. until the nitro revolution in the 1890s, the best way to stop a dangerous animal was a large bore gun firing very heavy projectiles (often round balls). Most were not rifled because they were intended for use at close range, and rifled 12, 10, 8 and 4 gauge guns recoil was fierce. These guns were similar to shotguns but were built heavier with thicker barrels and stronger stocks and actions.

This type of gun eventually evolved into the "Shot & Ball" guns. A heavy smoothbore with rifled chokes. Westley-Richards boasted that when fired with their ammuniton, their shot & ball guns were capable of hitting game out to 300 yards.
LTB1.jpg

Their "capped" bullets for their shot & ball guns were perhaps the first ballistic-tip expanding ammuniton to be mass produced.
 
  • Informative
  • Like
  • Dislike
Reactions: The Elusive Earl, Dean Pentel, DEBIRU MAN and 13 others
So the only thing wrong with Gen 5 is the plastic denial tab right? Not a glock person but I've always kinda dug the longslide 17 so I might take the plunge.

e: the plunge on both a 40 MOS and 17 L MOS...
 
Last edited:
Does anyone know what Glock is doing to nigger-proof the 34 models that have been discontinued? I feel like it's going to take a long time to get them back on the market if Glock is going to make major changes to their machining and tooling process.
 
  • Thunk-Provoking
Reactions: DunmerisTopBrass
Smokingpoop said:
Does anyone know what Glock is doing to nigger-proof the 34 models that have been discontinued? I feel like it's going to take a long time to get them back on the market if Glock is going to make major changes to their machining and tooling process.
Click to expand...
From my understanding the 34 is permanently discontinued. Lot of guys like Ben Stoeger claim the G47 shoots even flatter and with optics the longer sight radius is kind of redundant.

As for the Gen V the rumor mill is barely anything is going to be backwards compatible besides the barrel and magazine. It's clearly intended to be a stop gag measure until the Gen 6 comes out next year.

I personally don't care - I'd rather Glock decide to try and nigger proof their models then the govt step in like how open bolt firearms are essentially illegal now.
 
  • Like
  • Horrifying
Reactions: Dean Pentel, DunmerisTopBrass, Falcos_Commisar and 3 others
Taser Confetti said:
From my understanding the 34 is permanently discontinued. Lot of guys like Ben Stoeger claim the G47 shoots even flatter and with optics the longer sight radius is kind of redundant.

As for the Gen V the rumor mill is barely anything is going to be backwards compatible besides the barrel and magazine. It's clearly intended to be a stop gag measure until the Gen 6 comes out next year.

I personally don't care - I'd rather Glock decide to try and nigger proof their models then the govt step in like how open bolt firearms are essentially illegal now.
Click to expand...
Wow permanently discontinued... I agree what you're saying about government overreach but damn my heart hurts right now. Thanks for nothings niggers and faggot communist law makers.
 
  • Feels
  • Agree
Reactions: Dean Pentel, DunmerisTopBrass and Fount of BadSpeak
Smokingpoop said:
Wow permanently discontinued... I agree what you're saying about government overreach but damn my heart hurts right now. Thanks for nothings niggers and faggot communist law makers.
Click to expand...

The G34 was discontinued before this just like the G49. Glock culled a lot of models because they decided their catalog was too big. Same with the .357SIG and .45GAP models.
 
  • Informative
Reactions: DunmerisTopBrass and Buttigieg2020
Smokingpoop said:
Does anyone know what Glock is doing to nigger-proof the 34 models that have been discontinued?
Click to expand...
Absolutely nothing, I assume. What could they even do to guns that have already left the factory?


Smokingpoop said:
I feel like it's going to take a long time to get them back on the market if Glock is going to make major changes to their machining and tooling process.
Click to expand...
If they're ready ro deliver to retailers in December, any changes have already been made, or are ready to hot swap the second the last gen 5 leaves the production floor.

I'm wondering if the Vs will have magazine disconnects to get on the California roster, or if they get grandfathered somehow, or if Glocks are just DOA for California from December on out (until existing stock runs dry). Apparently "new" guns can still get on the roster without the required features if they're revisions of models already on the list, I just don't get how they draw the line (especially since I've heard shit like FDE versions of approved models not getting on the roster because "it's technically a different model").

They're gonna push me to snag a G20 this year instead of a 357 revolver that I had planned to get first.
 
  • Informative
Reactions: Smokingpoop
Smokingpoop said:
Does anyone know what Glock is doing to nigger-proof the 34 models that have been discontinued? I feel like it's going to take a long time to get them back on the market if Glock is going to make major changes to their machining and tooling process.
Click to expand...
Oh.

Nothing.

The G34 (and all long slide models) are dead.

F
 
  • Feels
Reactions: DunmerisTopBrass, Smokingpoop, Fount of BadSpeak and 1 other person
Taser Confetti said:
From my understanding the 34 is permanently discontinued. Lot of guys like Ben Stoeger claim the G47 shoots even flatter and with optics the longer sight radius is kind of redundant.

As for the Gen V the rumor mill is barely anything is going to be backwards compatible besides the barrel and magazine. It's clearly intended to be a stop gag measure until the Gen 6 comes out next year.

I personally don't care - I'd rather Glock decide to try and nigger proof their models then the govt step in like how open bolt firearms are essentially illegal now.
Click to expand...
I would prefer them to tell the .gov to get fucked, and then stop selling and supporting Glocks to law enforcement in states that ban them, like what Barrett did. Except with Glock it will have actual teeth, because of all the agencies who use them.

If that means they have to go back to the shake awake P320's from Sig, too fucking bad, Californian cops are usually the bad guys anyways.
 
  • Agree
  • Winner
Reactions: Dean Pentel, DunmerisTopBrass, AFAB and 3 others
Smokingpoop said:
Wow permanently discontinued... I agree what you're saying about government overreach but damn my heart hurts right now. Thanks for nothings niggers and faggot communist law makers.
Click to expand...
If you want a 34 just get a 17 and an aftermarket or used slide.
Screenshots_2025-08-09-19-27-35.webp

Now, a 17L, that'll be a little harder to come by.
 
  • Like
Reactions: Dean Pentel, DunmerisTopBrass, Falcos_Commisar and 2 others
BikeLock said:
I would prefer them to tell the .gov to get fucked, and then stop selling and supporting Glocks to law enforcement in states that ban them, like what Barrett did. Except with Glock it will have actual teeth, because of all the agencies who use them.
Click to expand...

Besides maybe FBI's HRT LEO have absolutely no use for .50 cal sniper rifles. Barrett's blockade of California LEO agencies was performative. Glock is an Austrian handgun company that lives and breaths govt contracts. LAPD is running FN 509 and CHP is running M&P's already. If you don't like them providing Glocks to California you're gonna hate their overseas contracts. No gun company worth mentioning doesn't supply for governments that aren't gun grabbers.
 
  • Like
Reactions: Dean Pentel and likeacrackado
Deep Six chassis arrived today. I had to go buy a pistol grip without a beaver tail and went with a MagPul MIAD. I'm really liking how it's all coming together. It feels lighter than the SB Tactical polymer chassis the F22 came with. I've got a Strike Industries MPX/MCX style telescoping/collapsing brace coming for it, and hopefully the Deep Six is narrow enough for it to fully collapse. Next will be an upgraded barrel, then after that I'll be getting the chassis Cerakoted.

20251021_163918.jpg20251021_163941.jpg
 
  • Like
Reactions: Dean Pentel, DunmerisTopBrass, Falcos_Commisar and 2 others
You must log in or register to reply here.
Back
Top Bottom